Rock Cakes by Hagrid

rock cakes by hagridHarry Potter is celebrating a birthday shortly, which is the only excuse we need to bust out our hats and robes and do something Potter. You might recall our Wand Works event, which included some awesome Flourish & Blotts giveaways. Well, when Katie and I were researching said giveaways, we stumbled across The Unofficial Harry Potter Cookbook by Dinah Bucholz (Adams Media, 2010). Today, we’re going to test a couple recipes from the book. And post reaction shots. In wizard robes.

the unofficial harry potter cookbook by dinah bucholzThe cookbook contains 10 chapters and 150 recipes. While a traditional cookbook organizes its recipes under chapters like main dishes, salads, and sides, the Unofficial Potter has chapters like “Recipes from a Giant and an Elf” (Rock Cakes, Bath Buns, Treacle Fudge, Kreacher’s French Onion Soup, etc.) and “Good Food with Bad Relatives” (Lemon Pops, Knickerbocker Glory, Roast Pork Loin, Mulligatawny Soup, etc.).

The Unofficial Potter is also an interesting education in British cuisine, as recipes for crumpets, kippers, and black pudding are included, among other things. Each recipe in the cookbook is matched to a Harry Potter reference and there are also very interesting bits of culinary history. For example, did you know the first ice cream recipe came to England in the 1600s and King Charles the I swore his cook to secrecy because he wanted to keep the delicious dessert exclusive to royalty? Such a scallywag.

OK! On to the recipe tests! Katie tested 3, and I tested 1. Here we go…


ROCK CAKES, tested by Katie

The recipe for Hagrid’s infamous rock cakes was one of the first I spotted in The Unofficial Harry Potter Cookbook. I couldn’t wait to give it a go and see if they are as delicious as Hagrid claims because we all know he eats them throughout the Harry Potter series. My sous-chef son had been eager to get back into the kitchen with me after our failed attempt at making Monsieur Bon-Bon’s Top Secret “Fooj.” We’ve baked many times together, so we were confident we wouldn’t mess up this recipe!

My sous-chef carefully measured and combined all of the dry ingredients (flour, sugar, baking powder, cinnamon and salt) into a mixing bowl while I prepared the cookie sheet and turned on the oven. After we washed our hands several times, we dove into mixing the butter into the dry ingredients.

rock cakes 1It didn’t take long before the use of our fingertips turned into the use of our full fingers (and some of our hands) in order to make sure we fully incorporated the butter into the dry ingredients.

rock cakes 2After folding the egg and milk into butter mixture, we slowly mixed in the raisins. This was the only time we both grew concerned about the rock cakes. The batter seemed really thick and tough to mix. After a short while, my son didn’t have the strength to fold in the raisins so he passed the spoon over to me. Even I had a hard time making sure the raisins were fully mixed in!

Once we both determined the raisins were well combined, we dropped the dough onto the cookie sheet. We skipped using a tablespoon to measure the dough size and just eye-balled the amounts. There was a small amount of batter leftover that my son used for his own personal “teeny tiny” rock cake.

rock cakes 3We slid the cookie sheet into the oven for 25 minutes, turning the sheet once in the middle of the baking cycle. Once the rock cakes were lightly brown on the bottom, we pulled them out and set them on racks to cool. The next morning, Dr. Dana and Marissa’s office test confirmed…the recipe is a winner!

rock cake taste testRock cakes have the appearance and consistency of a scone, so they would be perfect as a morning treat with a cup of coffee or eaten in the afternoon with a spot of tea. My son and I brainstormed other filling options to use in place of raisins and we came up with dried fruits, such as cranberries, cherries or blueberries, chocolate chips, or perhaps just including a splash of vanilla extract to the dough. You could also skip adding anything and eat plain rock cakes with a pat of butter and glob of your favorite jam or jelly.

In honor of Hagrid, Dr. Dana and I set one rock cake aside and let it harden for over a week to see what would happen. It was hard, though not as hard as a rock because Ian was able to take a bite and not break a tooth. I deem the rock cakes recipe worthy of trying in your kitchen!


ACID DROPS tested by KATIE

Confident from our success with the rock cakes, my sous-chef and I moved onto another intriguing recipe: acid drops. Poor Ron Weasley had a hole burned in his tongue when his mischievous brother, Fred, gave him one to try. What would happen to us?

I had most of the necessary ingredients already, but I did have to hunt down cream of tartar, which I discovered in the spice aisle, and citric acid, which was kept with the accessories needed for home canning.

citric acid and cream of tartarAs I lined two baking sheets with parchment paper, my son measured and combined the water, sugar, and cream of tartar in a small pot. He asked for help with the corn syrup as it looked to him to be hard to measure correctly. I happily obliged to avoid a sticky syrupy mess. We followed the directions carefully, stirred the mixture constantly and used a candy thermometer once our concoction was bubbling. We watched the candy thermometer slowly rise in temperature, stirring every once in a while.

acid drops 1All was going well until the mixture reached a temperature of about 250 degrees Fahrenheit. That’s when I noticed our whitish clear blend suddenly started turning brown.

acid drops 2There was also a distinguishable burning smell being emitted from the pot. I knew this was not good, but we decided to follow through until the mixture was at 300 degrees Fahrenheit, per the recipe. Once it hit that temperature, I turned off the burner and we added the citric acid. As soon as the mixture had cooled and stopped bubbling, we took turns dropping teaspoon sized circles of the candy onto the baking sheets.

acid drops 3Total fail. Acid drops are supposed to be yellow or yellowish-white, not dark brown almost black. The smell of the candies also reaffirmed what I already knew: the sugar had scorched and the candies were a bust. On a dare, Dr. Dana tried one of the burned candies. I think this image says it all.

dr. dana taste tests burned acid dropAttempt #2. I consulted Google to find suggestions or ideas from others who have suffered similar fates with their candy. Apparently sugar is very easy to burn, so you have to be cautious when your mixture starts getting close to reaching 300 degrees Fahrenheit. Armed with this new information, I set forth to try again.

I think I may have pulled the mixture off the burner too soon because it didn’t harden into candy. It was congealed and looked like white, stringy amoebas when I dropped it onto the baking sheets.

acid drop 6Not wanting to give up, I tried the recipe for a third time. Did I finally find success? Maybe.

acid drops 5The third candy attempt definitely had a yellow appearance, smelled like lemons, and hardened into round-ish discs. The acid drops were sour to the taste, but not overly sour like I had expected. What we didn’t anticipate was once we put the acid drops into our mouths, the candy adhered itself entirely to our teeth! It was quite alarming. Here are Dr. Dana and Ian captured at the very moment the acid drops adhered to their enamel like a vise:

acid drops taste testMy takeaway from trying to make acid drops is that I’m a baker, not a candy maker. I offer a round of applause to those who can make candy because, alas, it is proven that I cannot. I’ll officially hang up my candy maker hat and leave the job to Honeydukes.


TRIPLE POWER ICY LEMON POPS tested by KATIE

My sous-chef son was thrilled when we found the lemon pops recipe in The Unofficial Harry Potter Cookbook because he has a wicked sweet tooth (like his mother) and he absolutely loves anything with lemons. He’s been known to steal lemon slices from my water glass and eat them raw without making a funny sour face.

The only ingredient that I didn’t already have in my kitchen for the lemon pops was lemon extract, which I found in the spice aisle at our local grocery store. I took care grating the zest of our lemon directly into the saucepan, making sure to not add any of the white rind because that could cause the lemon pops to have a bitter taste.

lemon pops 1My sous-chef squeezed the juice out of the zested lemon using our handy lemon/lime press, and then he added the sugar and water to the pan. After bringing the mixture to a simmer, we turned off the heat and added the lemon extract. We let the mixture cool down a bit before pouring it into our popsicle molds, then we placed the molds into the freezer.

lemon pops 2Many hours later, we gave the lemon pops a taste. Delicious! The combination of the lemon zest, juice and extract along with the added sugar gave the lemon pops a nice sweet and sour flavor that almost tasted like limoncello liquor. But trust me when I say that these popsicles were absolutely alcohol free.

lemon pop taste test

Two hardy thumbs up for the Triple Power Icy Lemon Pops! We agree with Harry Potter, these popsicles are quite good!


CHOCOLATE PUDDING tested by DR. DANA

I tested something chocolate. Are you shocked? Specifically, I tested the chocolate pudding recipe in the chapter entitled “Delights Down the Alley.” We have food allergies in my house – including eggs – so pudding is usually off-limits. I was thrilled that, unlike most pudding recipes, this one was eggless! The binding agent is cornstarch.

cornstarch thumbs upI won’t send you process photos because Katie’s stove is way cleaner than mine. But I will say that this recipe is straightforward, easy, and can be made in a single pot. The ingredients are sugar, unsweetened cocoa, cornstarch, milk, cream, butter, bittersweet chocolate, vanilla, and a pinch of salt. Though simple, there is a bit of cooking magic involved in the final stove top stage – the recipe transfigures from a chocolate liquid to a thick, velvety pudding. Mmmmm.

The recipe says to strain the pudding into a bowl (I’m guessing to catch some of the inevitable lumps). But I don’t have a strainer, so I skipped that step. The pudding was a tad lumpy, but not enough to bother me or my extraordinarily picky children. Here’s a shot of the pudding before it headed into the fridge to set. Note the magic wand in front of the bowl.

pudding 1How does the Unofficial Potter pudding taste? Awesome. The milk, cream, and butter in the recipe make it rich, but not too heavy. The consistency is great too. Very smooth and creamy. Ian had a taste and found the chocolate pudding to be quite…bedazzling.

pudding taste test


We only scratched the surface of the Unofficial Harry Potter Cookbook, but we really liked it! It’s a fantastic blend of British dishes, culinary history, and astute references to the dishes and desserts served in the Harry Potter books. It’s clear the author is either a fan of the books, a very good researcher, or both! If you are a Harry Potter fan who likes to cook, or if you are ready for some hands-on experience with meals in the wizarding world, add this book to your collection!

Wrist Owls

wrist owlsCats might make you sneeze and toads are rather old-fashioned. What you really need…is an owl! This project (which is derived from these wrist parakeets) is designed to be simple, inexpensive, and a snap to assemble at large-scale events with minimal staffing. The owls were a huge hit at a Harry Potter event we did in 2007, and again in 2017 at Wand Works.

You’ll need:

  • 1 toilet paper tube
  • Construction paper
  • A selection of small feathers
  • 1 pair of dot stickers (optional)
  • 1 small triangle of self-adhesive foam or construction paper
  • 1 pipe cleaner
  • Scissors, tape, and hole punch for construction
  • Brown or black markers

The color of your construction paper and feathers varies depending on the color of your owl. At our event, we offered both brown and white options.

Wrap a toilet paper tube with construction paper, then use tape (or glue) to attach feather wings and ear tufts. Use a marker to draw the owl’s eyes – or – use dot stickers for an extra pop of color. We added details to our sticker eyes with a Sharpie ultra fine point markers. Attach a small triangle of self-adhesive foam for the beak (or just use a snippet of orange or yellow construction paper).

The earlier incarnation of this owl project used different shades of brown construction paper for the owl’s head and its stomach:

alternative owlBut we simplified things further and just used markers to draw outlines of feathers on the owl’s chest. Finish by punching 2 holes on the bottom of the tube. Thread a pipe cleaner through the holes, then fasten the owl to your wrist. You’re ready for Hogwarts!

off to hogwarts

The Wizard Behind the Wands

gray magic woodworking wand 161Does the wizard choose the wand? Or does the wand choose the wizard?

If there is one person who knows the answer to this intriguing question, it is Lane O’Neil, the master wandmaker behind Gray Magic Woodworking. Lane brought his wands, tools, and expertise to our library’s Harry Potter Wand Works event, and we couldn’t have been more delighted.

Even though Lane has been woodworking for 25 years, he didn’t take up the wand making lathe until fairly recently. Four years ago, during a hike, he picked up an oak branch. He carved the branch into his first wand – a gift for his young daughter. 291 hand-crafted wands later, Lane is still busy carving and shipping his unique pieces around the world.

gray magic woodworking wand 155Fantastically, Lane donated 3 of his wands to our Accio Wand blog contest! Readers of all ages were invited to submit an original Harry Potter spell, be it silly or serious. The winning entries are posted here.


How did you first get interested in wandmaking?

I got interested in wandmaking slowly over time. I enjoyed the Harry Potter movies, and being an artist, I was instantly drawn to the concept of each witch or wizard having a unique wand. They were made from different woods, had different cores, and were made by different wandmakers. The idea that the wand was linked to the person was wonderful. Sometimes the style fit the personality like Hermione, Sirius, or Narcissus. And sometimes it didn’t, like Ginny, Harry, or Mad-Eye. Sometimes the wand only reflected the holders shallow exterior, like Delores Umbridge, or what beauty was hidden beneath the surface, like Luna.

I had vision upon vision in my head of new pieces to create. And I got to work. I wanted each piece to be unique. I love the idea of the wand being paired to one person. It’s less of a part time job now, more of a labor of love.

gray magic woodworking wand 232What sorts of woods do you use?

When I first started, I used what was readily available, Oak, Poplar, Ash, Maple. But as I discovered, there are hundreds of species of trees. I now use Paduak, Gaboon Ebony, Birch, Purpleheart, Cherry, Bubinga, Cocobolo, Koa, Osage Orange, Mahogany, Lacewood, you name it. The more exotic and far traveled it is the better. I love the different textures, grains, colors, and figures.

gray magic woodworking wand 050Where do you acquire the wood for your wands?

I get wood wherever I can. Found pieces, traded pieces among my woodworking group, but primarily I use exotic hardwood suppliers. I got requests to craft from Holly, Elder, and Larch. And since I just couldn’t run down to Home Depot and pick up some Bolivian Rosewood, I needed to branch out and discover new suppliers.

wood piecesMy favorite place is called Hearn, they are located in Oxford, PA.  It’s like a candy store for people who craft wood. They have everything from domestic scraps to 16′ slabs of exotic wood shipped from the hearts of far away continents.

Describe the process of carving a wand from start to finish.

I start with a dried, seasoned “blank.” It’s usually about 1″X1″x16″. I drill a small shallow hole into each end to secure it in the lathe. I remove the Morris Taper spur from the lathe, tap it onto the wood blank, insert the spur/wood onto the lathe, and lock in the tail stock. I make sure I have my safety goggles and breathing respirator on, and my sleeves rolled up.

I position the guide, turn on the lathe, and use a “roughing gouge” to take the edges off until I have a smooth, long cylinder. I can then draw lines, if needed, for length or detail locations. Then I use various skews and chisels to shape the wand.

chiselWhen it’s just about fully shaped, I use sandpaper to smooth it – working to smaller grits until I’m happy with the texture. I can also stain or paint the wand while it’s spinning. I usually use a carnauba wax/ tung oil blend to finish fully.

latheWhen I’m just about done, I “part” the wand from the lathe by cutting the material away by the tip or pommel until the wand falls off. I move the piece to the work bench, saw the remaining scrap block off, sand the two rough ends, and finish with carving, wood burning, or other decorations. I tag it, give it a name, and a number.

gray magic woodworking wandsHow long does it take to make a wand?

The time it takes to make a wand depends on the intricacy. The first wand I ever turned took an hour and half…and it was kind of rough. I spent about 80% of the time carving and shaping, and 20% sanding and finishing. Now it’s more like 40% of the time carving and shaping, and 60% finishing. I under-valued the worth of the finish when I got started, but my skill improved.

I made 22 wands for my daughter’s class for Valentine’s – real simple and basic. Those took 4 minutes each. I also made one covered in carved vines that took 8 hours. But the average time would be 45-60 minutes.

gray magic woodworking wand 234What locations have your wands shipped to?

I’ve shipped as far North as Fairbanks Alaska, as Far East as Taipei Taiwan, as far South as Singapore, and as far West as Anchorage, Alaska. All over Europe and Saudi Arabia too.

gray magic woodworking wand 251What’s the most unusual or significant wand you’ve ever made?

The most unusual wand I ever made was a hand carved series of twisted “vines.” It appears to be woven, but is actually sculpted out of a block of wood.

gray magic woodworking wand 256The most significant wand I’ve ever made is a tie. I made a Beech wand that was chosen by a young girl from the Make-A-Wish Foundation. There wasn’t anything too special about it other than the leather wrapped handle, but she chose it.

gray magic woodworking wand 055The other one was purchased by a mother in London, England. She bought a Japanese Maple for her son Harry for his 10th birthday…that was pretty cool. His mother sent me a photo.

harry and his gray magic woodworking wand


Photos courtesy of Gray Magic Woodworking.