Tag Archives: instructions

Treetop Architects

Posted on by

Design you own tree house complete with tire swing, water bucket, and stunning views of the verdant foliage. Best of all, it can be crafted with just about anything!

We read The Tree House that Jack Built, written by Bonnie Verburg and illustrated by Mark Teague (Orchard Books, 2014). Jack lives in a tree house with his animals friends who cavort and cause a bit of mischief throughout the day. But when it’s bedtime, everyone settles in for a peaceful night of moonlight and ocean waves. Raucous and then relaxing, this is an especially awesome bedtime story choice!

You’ll need:

  • An assortment of small boxes, toilet paper tubes, and paper towel tubes
  • 1 flat corrugated cardboard base (we used a 9.5″ x 13.5″ cake pad)
  • Green poster board
  • Scissors, glue and tape for construction
  • Markers for decorating
  • Hot glue

Building off your corrugated cardboard base, simply hot glue boxes, toilet paper, and paper towel tubes in whatever way works for you! We also offered natural craft sticks, wooden letters (leftover from this project), stickers, fabric flowers, and green paper crinkle for added texture. The results were fabulous!

This slideshow requires JavaScript.

Note: the tire swing is a little snippet of foam pipe insulator you can get in the plumbing section of Lowe’s or Home Depot. It was definitely a big hit! And if you’re looking for a slightly more fantastical spin on this project, please see our fairy houses. Or at the very least, check out Katie’s hilarious real estate listings at the end of the post!

Digging Those Dinos

Posted on by

It begins as a simple brown briefcase, but unfolds into a magnetized dino dig! No briefcase? No worries! This Katie-designed masterpiece can be replicated with any box top or cardboard surface.

We read One Hundred Bones by Yuval Zommer (Templar, 2016). Scruff is a messy but happy-go-lucky stray who loves to dig (much to the chagrin of the neighbors). But when he finds an enormous cache of bones, he rallies the other dogs to help unearth them. Some of these bones seem a little…unusual, so the gang goes to the Natural History Museum, where Professor Dinovsky is happy to receive their dino-tastic discovery AND adopt Scruff, digger extraordinaire!

You’ll need:

  • 1 flat piece of cardboard (ours was 10″ x 15″)
  • 1 flexible magnetic adhesive sheet (ours was 8″ x 10″)
  • 1 dino bones template, printed on 8.5″ x 11″ brown construction paper
  • 1 dino bones template, printed on 8.5″ x 11″ white card stock
  • 1 dino dig tools template, printed on 8.5″ x 11″ white card stock
  • Scissors, glue and tape for construction
  • Markers for decorating

In its most basic form, this is a magnetized board that you can match the also-magnetized bones to. So this project can be done with any flat piece of cardboard. First, trim a .5″ x 10″ strip off a 8″ x 10″ flexible magnetic sheet (which we purchased on Amazon). Set the strip aside, then stick the remaining sheet to the cardboard. Glue the dino bone template on top of the magnet sheet. In the below photo, you can see the black magnetic sheet peeking out from under the brown paper…

Now cut the dino bones from the template. Section the magnetic strip into pieces, then stick them onto the backs of the various bones. The bones will now connect to the dino template (and you can see we added a tissue paper border for extra fun)!

Scatter the bones through a room and have your little paleontologists discover, dig, and collect them up using the paper tools from this template!

We had the good fortune of scoring some flat cardboard boxes with flaps through this program, so we took the project to the next level by turning it into a fold out dig with envelope pockets for the bones and tools.

We added a string strap to turn in into a portable briefcase, complete with a wood bead and rubber band closure and dino prints stenciled on the outside!

We finished the entire project by handing out plastic pith helmets (purchased from Oriental Trading Company). As you can imagine, a dino-themed project went over VERY well. There’s always a dino shirt or two at story time, but we were delighted when one little girl arrived with a stunning purple dino bag…

And I can’t resist adding this photo of Katie snagging the above photo whilst being carefully supervised by the dino bag’s owner. So sweet!

Survival of the LOUDEST

Posted on by

Librarians aren’t classically considered the loud type, but we found a squad of very willing ones to test drive “Really Loud Librarians,” a hilarious word association board game from the company that brought you Exploding Kittens. Spoiler alert: we had FUN!

The game is available for $20 both online through the company and Target. So I swung by the toy section on my weekly grocery run to pick one up.

The box contains a game board, pieces, category cards, and a timer. It looks very snazzy and I absolutely love the font the designers used. Very librarily.

The object of the game is to split into two teams (Team Gertrude Birdwhistle and Team Wilfred Dankworth, respectfully). Taking turns, each team draws a category card and circles the board until the timer runs out, shouting words that fit in that certain category, all of which must start with the matching letter on the game board. An example catagory would be “Desserts,” and the words as you progress around the board might be chocolate, flan, licorice, pie, sundae, tart, etc. The first team to reach 12 points wins.

Really Loud Librarians is for ages 8+ and two or more people can play at a time. So we rounded up some talented Princeton University librarians. We put on our toughest game faces, choose our field names, and got ready to (very) competitively categorize things.

Well, this was a total blast. It’s amazing how your mind can go blank when the timer is running out and you’re trying to think of a kitchen appliance that starts with “C.” There was a lot of laughter, cheering, good-natured ribbing, suspenseful moments, and yes…it got LOUD.

Some of the card categories are hard though! One team might get “Colors,” and then the next gets “Phone Apps.” That’s a tough category! You’ll need to access the board during your turn, so make sure to play on a small to mid-size table. It also gets a little difficult to keep track of your laps, so we suggest one person act as MC to count laps, turn the timer, and step in to decide whether what you shouted out is a qualifying word.

Also…and this might just be us…but whoever played Team Wilfred always won. Probably a fluke, but if you’re reading this and taking the game to a party, it might just give you an magical edge.

Really Loud Librarians was fun, lively, easy to play, and just an all around good time. Highly recommended!

Special thanks to librarians Neggin Keshavarzian, Beth Kushner, Hilary Murusmith, and Amy Vo for lending their extraordinary word-smithing abilities!