Say it with Chocolate

hello 1We’ve reviewed a lot of interesting word products on this blog (see this calligraphy kit, these spelling straws, these clay words, this bbq brander, this DIY neon letter kit, and this vanishing paper!). But today’s blog post has to be the sweetest test yet. Because Katie and her crew tested a chocolate pen. That’s right. A CHOCOLATE PEN. Take it away, Katie!


Candy Craft’s Chocolate Pen retails for around $30 and the suggested age range is 6+, though the instructions specifically say adult supervision and participation is required. I fully support this recommendation and want to add a personal observation. Children ages 10 and under will definitely need adult assistance, whereas kids 10+ should be able to do most on their own with one exception (more on this later).

The Chocolate Pen kit has everything you need to “draw & mold colorful chocolately treats.” There is ½ pounds of confectionary candy in different color pouches (white, red, blue and brown); four clamps; pen tips and caps; three mold trays; five gift bags and twist ties; and the chocolate pen itself (two AA batteries are not included). If you want to write out a word or make your own drawing, you will need to have sheets of either wax or parchment paper handy.

A quick note for those who have food allergies: the confectionery candy contains milk and soy. Please consult the nutrition facts for the full list of ingredients.

After thoroughly washing and drying the various pieces of the pen tip and the treat mold trays, I got to work putting the chocolate pen together. There are a lot of steps to follow, but the instructions describing how to prepare the confectionary candy pouches were clear and well written with informative drawings. However, the instructions did not prepare me for the frustration of attaching the candy pouch to the pen tip.

It took every ounce of my finger/hand strength to properly secure the clamp around the pen tip, which I had inserted into the open melted candy pouch. You have to leave at least 1/8” of excess pouch extending beyond the clamp for a good seal, which makes sense. It would be a disaster to have confectionery candy squirting out of the pouch and into the interior of the chocolate pen. But boy oh boy, it was a real challenge to close the clamp. It was messy, it was aggravating, and it cast serious doubt in my mind about the ability of any child being able to do it on their own (as I alluded to earlier). 

Once I was able to finally lock the clamp, I continued following the preparation instructions until I was ready to start drawing with the chocolate pen. I carefully wrote “Hello” and “Yum” in cursive on a piece of parchment paper. While it was relatively easy to write with the pen, I discovered that candy would continue to ooze out of the pen tip well after I had stopped pushing down the power button. Needless to say, I was left with a big blob of excess candy at the end of my word.

I called upon my son to lend his writing hand and give the pen a try. He wrote “Hola” and had the same problem with excess candy continue to push out of the pen tip after releasing the button. We carefully transported our words and placed them into the freezer to harden. After impatiently waiting the recommended five minutes, we took a bite of our chocolate words. The results were deliciously fantastic! The candy is quite sweet and tasty!

Next up was trying the mold trays. The mold shapes presented an unexpected challenge, due largely in part to the pen continuing to discharge candy after you stop pushing the power button. I found I had varying levels of success. I managed to create two- or three-color candies using the larger molds, but the smaller molds were very difficult. Even just pushing the power button for just 5-10 seconds caused extra candy to fill the molds too full or didn’t allow for a second color to be added. Under important information on the instructions, there is a statement that reads “results will vary from product images depending on age and skill level.” After testing this product, particularly the mold trays, I completely agree with that statement.

The Chocolate Pen is fantastic in concept, but I feel it falls very short of my excited expectations. Don’t get me wrong, I enjoyed eating my chocolate creations, but the frustration of trying to figure out the perfect amount of time to use the pen without the inevitable stream of extra candy made the process less than fun. The smaller mold shapes are hard to use, and sometimes the finished product didn’t easily pop out of the mold tray, as was the case for the little white music note!

Final ranking: 2 out of 5 stars

It appears the manufacturer made a significant update to this product sometime in 2020 and now offers an automatic load feature on the pen. The chocolate candy is warmed in a separate tray and you simply dip the pen into the color chocolate you want to use, load it and start creating. I’m glad they listened to their customers and made this much needed improvement. However, I’m quite curious there was any change to prevent the extra candy ooze when the pen is in use.

Home for Halloween

jack o lanternIt might be a smaller, simpler Halloween this year, but that doesn’t mean it has to be any less spirited (oooo bad pun alert!). We decided to do a round up of our Halloween posts for you to peruse, just in case you needed some projects, activities, costumes, or inspiration. But if you are just here to see Katie’s ingenious candy chute, scroll to the end of the post!


Above you see our cute toilet paper roll pumpkin project (bonus…the project is reversible, so no toilet paper wasted), but here’s a variation on it, using a balloon and an LED light. You might try this little lantern project, or go for this spooky votive castle

illuminated castle tissue box

For those of you looking for projects to do at home with limited materials, we recommend this printable skeleton marionette, or this simple but adorable paperclip skeleton:

el esqueleto

You can also try our hanging bat STEAM project, or this adorable ghost box (pair with a story time book and hide and seek game if you’d like)…

ghostbusters

Or make your very own shoulder raven! (and meet the REAL Poe raven here):

dr. dana as poe

Looking for a slightly more complicated project with a big WOW factor? Try this tabletop Pepper’s Ghost box, which can be constructed with items in your home, promise!

seeing spirits

For your costuming needs, we invite you to check out our thrift store costume challenge, where we basically pulled stuff from an average closet to create literary characters…

dolores-umbridge-costume

And here’s our Top 20 literary halloween costumes (the hobbits! the hobbits!), character makeup transformations, and some historic makeovers that will wow ’em at those Zoom Halloween gatherings!

model 5

For those of you wishing to ramp it up a notch, how about recreating our Dracula escape room? You’ll find a full breakdown here, including the puzzles and props we used…

full dracula room shot 3

For the younger kiddos we offer this box haunted house with ghost-hunting activity. No box? No problem! Drape a large table with a cloth and you’re set!

i-aint-afraid-of-no-ghost

If you’d like to keep it all virtual this year, try our online Sherlock Holmes escape room, take a look at some historic book curses, or enjoy our interview with this pumpkin carving master!

And finally…drum roll please…for Halloween 2020, check out Katie’s candy chute for the socially distanced trick or treaters! She constructed it with a 5″ HVAC tube, a pool noodle, and orange and black duct tape. The chute is about 5.5 feet long, which is perfect for distributing goodies to eager ghosts and goblins. I also want to confirm for the world: yes, Katie will be offering packets of Fun Dip this year. Oh YEAH!

IMG_0573

El Esqueleto

el esqueleto

Celebrate Día de Muertos with this jolly paper clip skeleton ornament! All it takes is 15 paperclips, paper, and a little glue!

You’ll need:

  • 15 paperclips
  • 1 rectangle of black poster board (approximately 4.75″ x 7.75″)
  • A number of yellow and gold tissue paper squares (approximately 3″ x 3″)
  • 1 snippet of ribbon (ours was 8″ long)
  • Scissors and squeeze glue for construction
  • Hole punch

The most important thing about this project is to use squeeze (i.e. liquid) glue. Glue sticks, alas, do not work! You’ll really have to glop the glue on to anchor the paper clips, but the good news is that everything dries clear and muy bueno!

First, punch a hole in the top of the black poster board rectangle. Next, glue crumbled yellow and gold tissue paper squares around the rectangle, making sure NOT to cover the hole you just punched.

Glop glue inside the rectangle, then arrange 14 paper clips to create your skeleton. The 15th paper clip gets unfolded and rounded to form the skeleton’s skull. Use hole punch remnants to make eyes, and a little snippet of paper to make the mouth.

Allow the frame to dry completely, then thread the ribbon through the hole. Done!