Hello Darkness, My Old Friend

hello-darknessAfraid of the dark? Nah! With this fantastic, illuminating friend, you can discover how much fun the dark really is! And if you’re still not convinced, join us for a glowing balloon bounce bonanza!

We read Orion and The Dark by Emma Yarlett (Templar Books, 2015). Orion is scared of everything, but he’s especially scared of the dark. Imagine his surprise when one night, the dark comes alive and drop right into his room! It turns out the Dark is actually a fun and playful friend. Together, they explore Orion’s house and town and he learns that the things he was afraid of…aren’t that scary. They’re actually kind of cool! In the grand finale, Orion and the Dark endeavor to conquer Orion’s final fear – outer space. Far from scary, outer space is simply magical. The friends return to Orion’s house just as dawn breaks. The Dark must go, but he promises to never be far away. In fact, he’ll be back every night for a visit!

You’ll need:

  • 1 large oatmeal container
  • 2 toilet paper tubes
  • Some tagboard or strong cardboard
  • Blue construction paper
  • A selection of foil star stickers
  • A pair of wiggle eyes
  • A small piece of white pipe cleaner
  • Glow-in-the-dark paint or glue
  • 1 paintbrush
  • Scissors and tape for construction
  • Hot glue

project-viewed-in-light

Begin by wrapping a large oatmeal container and 2 toilet paper tubes with blue construction paper. Set them aside for a moment. Cut a pair of oval feet (our were approximately 2.25″ x 3.75″), then cover the tops of the ovals with blue construction paper. Hot glue the feet to the bottoms of the toilet paper tube legs, toggle the legs a bit to get the balance just right, then hot glue them to the bottom of the oatmeal container.

Finish by adding a circle of blue construction paper to the top of the oatmeal container, construction paper arms on the sides, and foil star stickers everywhere.

Now to add the glow! We had a bottle of this non-toxic glow pigment in the cabinet, so we went with glow glue. I’m sure you’d also get great results with glow-in-the-dark paint as well (it’s sold at Michael’s Craft Store for $3 – $5 a bottle). We covered our work tables with paper, gave each kid a little cup of glue and a paintbrush, and let them create a night sky on their projects.

painting-the-projectThe neat thing about the glow glue is that it dried semi-clear, so there’s a bit of a dramatic reveal when it illuminates:

project-viewed-in-light-and-darkNotice how the eyes and mouth of the project are glowing too? Those are glow-in-the-dark wiggle eyes (available through Oriental Trading Company – a pack of 100 is $3) and a snippet of white pipe cleaner painted with glow glue. We were dubious at first, but the glue stuck to the pipe cleaner very nicely and dried quickly. It also stuck to Katie’s hands, giving her awesome alien fingers.

glow-fingersWhile the kids’ projects were drying on the tables, we decided to capture the spirit of the book by having lots of fun in the dark. We blew up a bunch of LED balloons (which you first encountered in this post), turned out the lights, blasted some Enya, and had a big, glowing balloon bounce party.

glow-balloon-partyWe also had a little black light closet set up, so kids could get a preview of what their creations would look like later than night.

inside-glow-room

one-glow-designtwo-glow-designSome of the balloon revelers ended up in the black light closet too. Because why not?

balloon-in-black-light-room

I Ain’t Afraid of No Ghost

i-aint-afraid-of-no-ghostBoldly enter a haunted house armed with your wits and your handy Haunted House Preparedness Kit! Trap a spider, catch a mouse with some cheese, deter a ghost with ghost spray, and use your skeleton key to exit through a secret door. There’s nothing you can’t handle!

We read I’m Not Afraid of this Haunted House, written by Laurie Friedman, and illustrated by Teresa Murfin (Carolrhoda Books, 2005). Simon Lester Henry Strauss is not afraid of a haunted house, no matter what it throws at him. Witches, ghosts, vampires, ghouls, werewolves, goblins, graveyards, Frankenstein (and bride), one-eyed monsters…nothing can phase our hero. Except, perhaps, a little mouse!

You’ll need:

  • 1 box (mine was 4.5” X 4.5” x 9” – a large tissue box works too)
  • 1 set of haunted house kit labels template, printed on 8.5″ x 11″ card stock
  • 1 strip of white poster board (approximately 1.75″ x 16″)
  • 1 haunted house kit contents template, printed on 8.5″ x 11″ card stock
  • 1 clear plastic cup
  • 1 circle of tagboard or poster board to fit the mouth of the cup
  • 1 toilet paper tube
  • 1 jumbo pom-pom
  • 1 small square of self-adhesive foam (approximately 0.5″ x 0.5″)
  • 1 button magnet
  • 1 wooden bead
  • 1 wiggle eye
  • 2 black pipe cleaners
  • 3 facial tissues
  • 1 long piece of string or yarn (approximately 24″ long)
  • 1 jumbo paper clip
  • 1 haunted house (more on this later!)
  • Scissors and tape for construction
  • Markers for decorating
  • Hot glue

Below are the contents of the Haunted House Preparedness Kit. From left to right is a spider collection jar, a skeleton key, a piece of cheese, and a can of ghost spray.

haunted-house-kit

First, the box! Color, cut, and attach the 2 front and back labels from the template. Next, use markers to decorate a strip of white poster board. Tab both ends of the strip inwards about 1″, then tape the tabs to the underside of the box lid. If you’re using a tissue box, just cut the top off the box and attach the poster board handle to the sides of the box.

The spider collection jar is a clear plastic cup flipped upside down. We used a 9oz “cocktail” cup because it has a nice wide mouth. Using a single piece of tape like a hinge, attach a circle of tagboard to the mouth of the cup. Make sure you don’t entirely attach the circle – you’ll need to open the jar later to stick your spider inside it.

The skeleton key and the ghost spray label are on kit contents template. Color the ghost spray label, and then wrap it around a toilet paper tube. To make the aerosol top of the can, hot glue a jumbo pom-pom to the inside of the tube, then peel and stick a square of self-adhesive foam on top.

ghost-sprayThe final item in the kit is a piece of cheese, which we made out of yellow card stock.  Draw holes on the cheese with black marker and hot glue a button magnet to its tip.

magnet-cheeseThe next round of items are the things you’ll be catching inside the haunted house – a spider, a ghost, and a mouse. First, the spider. Color a wooden bead with black marker and hot glue a wiggle eye on the front. Cut 2 pipe cleaners in half, then thread the 4 pieces through the hole in the bead. Bend the pipe cleaners to create wiggly spider legs.

spider-steps-1-and-2To make the ghost, wad up a facial tissue and fold 2 facial tissues over the wad. Tie the end of a 24″ string around the wad to create the neck of the ghost. Make sure to leave plenty of string free to dangle your ghost later! Use a maker to add eyes and a mouth.

tissue-ghostFinally, color and cut the mouse from the template. Tape a jumbo paper clip to the underside of its mouth. Later, this paperclip will attach to the magnet on the cheese.

mouse-and-cheeseThat’s everything you need for your adventures in the haunted house…now you just need the house! It doesn’t have to be fancy. Drape some sheets over the shelves in your stacks, or drape a tablecloth over a table and have kids crawl under it. But if you have a giant box,  2 smaller boxes, and a black light handy, go for it! Here’s the front of out house (plus a photobomb by Marissa).

front-of-haunted-houseI love the lanterns by the door. They’re LED candles inside plastic cups, which are attached to the box with black poster board. There’s a little poster board flourish hot glued to the bottom of the cup too.

lantern-detailHere’s a shot of the house’s interior, as seen from the front door. There are LED wall sconces, a mirror, a bookcase, old-fashioned portraits, a clock, and a fireplace that leads to the black light room. And there were also 4 activities for the kids…coaxing a mouse out of the mouse hole, catching a spider, spraying a ghost with “Bye-Bye Boo” spray, and using a skeleton key to exit through a secret door.

interior-of-haunted-house

The haunted house also had a black light room – a delightful masterpiece created by  Marissa. She used glow-in-the-dark squeeze glue and black light Sharpie markers to highlight everything. We cut a little door in the side of the room so we could quickly slip the kids’ spiders inside.

black-light-spider-roomAt the very back of the house was a secret door, which was covered with tagboard strips made to look like wooden planks. The interior of the secret door box with lined with gray felt. To give it an underground kind of feel, I used a thick black marker to draw outlines of stones on the felt.

secret-doorHere’s a shot of the haunted house from the right side. Everything was was held together with lots of hot glue and packing tape.

right-side-of-haunted-houseThe left side of the house had the mouse hole, which we covered with black felt to keep light from leaking in. My kids did all the exterior decoration. Like the dead flower garden on the lower right?

left-side-of-haunted-houseSo! Here’s how it went! Kids lined up outside the house. When it was their turn, they handed us their spiders, mice, and ghosts. Then they entered the house with their kits.

waiting-to-get-inOnce inside, they listened for the mouse squeaking in the mouse hole (this was literally Marissa saying “Squeak squeak!” and wiggling the nose of the mouse outside the hole). Kids stuck the magnet end of the cheese into hole and “caught” the mouse. Into the kit it went!

catching-a-mouseNext, kids reached into the black light room, grabbed their spider, and put it in their collection jar. By this time, I had opened the trap door in the roof and dangled their wailing ghost in (I followed Marissa’s lead, enthusiastically saying “Wooo wooo!”). The kids doused the ghost with a ghost spray, causing it to drop to the floor of the house. Into the kit the ghost went.

dangling-ghostThe final task was for kids to shimmy into the secret room and use the skeleton key to unlock the door. We wouldn’t lift the door until we saw a key in the key hole!

skeleton-key-unlocksKids could go through the house as many times as they wanted, and we kept story time going 20 minutes past our end time to accommodate repeat explorations. It was…wait for it…a total scream! Awwww.

Did you notice the old-fashioned portraits in the kid catching mouse image? I have to give Marissa a shout out for her mad drawing skills here. She drew us! In Victorian clothing! I love my hat.

portraits-of-dana-and-marissaThe portraits are a nod to the day we spent sipping Victorian tea at this program. Fun!

Them Bones

them bonesWhat’s cooler then a skeleton marionette that glows? How about a skeleton marionette that glows, attaches to your feet, and dashes around with you?

marionette bonesHere’s my assistant, Katie, showing off some fancy skeleton footwork…

foot loops in actionWe read Skeleton for Dinner, written by Margery Cuyler and illustrated by Will Terry (Albert Whitman & Company, 2013). Big Witch and Little Witch whip up a tasty brew and decide to invite skeleton to share it. “We must have Skeleton for dinner!” is what they say, but Skeleton, who is strolling nearby, thinks they mean that HE’S on the menu! Panic ensues, which soon envelopes Ghost and Ghoul (who are also on the invite list). Finally, Clever Crow figures out the problem, sets things straight, and the friends enjoy a tasty meal together.

You’ll need:

  • 3 paper towel tubes
  • 5 toilet paper tubes
  • Black construction paper (or black paint)
  • A rectangle of white card stock for the skull (approximately 4.25″ x 5.5″)
  • 12, 4″ pieces of twisteez wire (pipe cleaners work too)
  • 2 brass fasteners
  • 1 wooden dowel
  • A selection of color masking tape
  • String for puppet’s head & arms
  • 1 pipe cleaner
  • 2 medium rubber bands
  • 1 arms, legs, hands, feet template, printed on 8.5″ x 11″ white card stock
  • 1 ribcage, pelvis template, printed on 8.5″ x 11″ white card stock
  • 1 jumbo pom-pom (mine was 1.5″)
  • Markers for decorating
  • Scissors, tape for construction
  • Hole punch
  • Hot glue
  • Black light (or custom glow-in-the-dark glue…more about that here)

If there’s ONE thing that would make this project faster to assemble, it would be to paint all the tubes black. We can’t do paint in our library (see the FAQs), so we wrapped all of our tubes in black construction paper. It took some time!

tubesFor the assembly photos in this post, I decided to show you unwrapped rolls on a white background with red twisteez wire, red yarn, and red rubber bands so all the pieces would be more visible. On  the actual skeleton the tubes were black, connected with black twisteez wire, and I used white string. So please excuse the blah assembly photos. I just wanted to make sure all the steps were clear!

We’ll start from the legs up. Cut a paper towel tube in half. Punch holes on the top of one tube half, and the bottom of the other tube half. Thread twisteez wires though the top and bottom holes on each side of the tubes, joining them together. Making sure to leave some space and twist the ends of the wire together.

legRepeat the above steps with the second paper towel tube. You now have two legs that bend at the “knee.”

two legsThe third paper towel tube is your skeleton’s torso. Attach the legs to the torso by punching holes on the bottom outside of the torso tube, and the top inside of each of the legs (it’s easier to see this step in the image below). Attach the legs to the torso using brass fasteners.legs to torso 2Making an arm is just like making a leg, except you’ll be using toilet paper tubes instead of paper towel tubes. Punch holes in the top of one toilet paper tube and the bottom of the other toilet paper tube. Thread twisteez wires though the top and bottom holes on each side of the tubes, joining them together. Twist the ends of the wire together.

armRepeat the above steps with 2 more toilet paper tubes. You now have two arms that bend at the “elbow.” Attach the arms to the torso by punching holes on the top outside of the torso tube, and the top inside of the arms (again, it’s easier to see this step in the image below). Attach the arms to the torso using twisteez wire.

arms to torsoTo make the skull, draw a face on a rectangle of white card stock (alas, white construction paper doesn’t fluoresce under black light). Wrap the skull face around a toilet paper tube.

To attach the skull to the torso, punch holes in the front and back of the bottom of the skull (i.e. the base of the neck and the skeleton’s “chin”). Punch matching holes in the front and back of the torso tube. Attach with twisteez wire.

headThe tube body is done, now for the strings! Quick note: I used red yarn for the instructions below, but for the actual skeleton, I used thin white string.

stringFirst, wrap the wooden dowel with color masking tape. Now punch a hole in the back of the skull tube, near the top of the head. Thread a piece of string through the hole and knot. Attach the other end to the middle of the wooden dowel.

head stringNext, punch a hole in the “elbow” of each arm tube (i.e. the outside bottom of the top arm tube). Knot a piece of string through the hole.

arm stringsBut wait! Before you tie the arm strings to the wooden dowel, may we introduce one delightfully dynamic option? If you want to be able to move your skeleton’s arms, follow the following steps:

Cut a pipe cleaner in half. Bend the half pipe cleaner into a loop and twist the bottom together tightly. Tie an arm string to the loop, then reinforce with a piece of color masking tape.

loop stepsRepeat with the remaining half of the pipe cleaner.  You now have 2 pipe cleaner loops that slide on and off the wooden dowel, allowing you to manipulate your skeleton’s arms!

finished bodyFinally, punch a hole in the “heel” of each leg and loop a rubber band through it.

foot loopThe rubber band stretches over your shoe so you can walk your skeleton around!

foot loops againWith the body all rigged up, the last step is the bones! Color the bones in the template, then tape (or hot glue) them to the fronts of the tubes. Pop a jumbo pom-pom in the top of the skull tube to round off the look (I secured the pom-pom with a little hot glue)

bones We rigged up a black light and mirror in a storage closet and invited kids to march in and  watch their skeletons boogie. They absolutely loved it – especially when their skeleton’s feet matched their own dancing feet!

night bones