Puppies and kitties in our Storytime Shelter eagerly await adoption…bring your custom pet set (complete with carrier, treats, blanket, ball, collar, and food dishes) and find your forever friend!
We read Who Wants Broccoli? by Val Jones (Harper, 2015). Breezly’s Animal Shelter has many pets, but none quite as big, energetic, loud, and messy as Broccoli the dog. The problem is, most people want a slightly less…ah…enthusiastic pet in their homes. So Broccoli gets passed over time and time again. But when little Oscar moves across the street, a big energetic dog is EXACTLY what he wants. Yes! Broccoli and Oscar, together in love and loudness.
You’ll need:
- 1 large tissue box
- A box cutter
- 1 strip of poster board
- 1 toilet paper tube
- 1 dog adoption papers template, printed on 8.5″ x 11″ paper
- Various pet accessories (more on this below!)
- Scissors, tape, and stapler for construction
- Markers for decorating
Accessories vary according to what you have on hand, but here’s our pet set…a carrier, treat canister, plastic ball, blanket, collar with bell, and a water and food dish.
We used a 4.5” X 4.5” x 9” craft box, but a large tissue box works too! Use a box cutter to make a little door in one side of the box. We added a foam bead knob to the door, and used a hole punch to create “air holes” as well. The pet carrier’s handle is a strip of poster board stapled to the lid. You can decorate the carrier with markers, or used color masking tape and patterned tape like we did.
We wanted the top of the carrier to open so kids could stash their supplies, but we didn’t want the lid flying open while they were carrying the box. So we rigged up a latch using foam beads and a small rubber band. It worked great!
In terms of accessories, our treat jars were old film canisters, the balls were leftover from our Willy Wonka escape room, and the food and water dishes were snippets of a toilet paper tube. A little bit of ribbon, a bell, and a square of fleece fabric completed the set.
But the REAL surprise? You actually got to take a dog home, courtesy of a major Beanie Baby donation to our library!
Yes! When kids were finished their pet carrier set, they walked over to our Storytime Shelter (which was a cardboard facade propped up by two small tissue boxes).
Kids waited outside the shelter while Katie asked them the following questions…
Do you like dogs that bark, or dogs that are more quiet?
Do you like dogs that do tricks?
Do you like to play ball?
Do you want an adult dog? Or a puppy?
Will you take good care of your dog?
When all the questions were answered, Katie would select a Beanie Baby dog and “run” it out the shelter door to the kids, and the official adoption papers would be signed!
After everyone had a dog, we made another special announcement. You would get to select ANOTHER Beanie Baby companion for it! And out came a massive box of Beanie Babies to choose from. Were the kids excited? Oh, they were WAY excited! So were the grown ups! Hah!
We had enough Beanie Babies to allow younger siblings to adopt pets as well. So no one left the Storytime Shelter empty handed.
And now, an incredibly sweet coincidence…one little girl selected a cat from the big box of Beanies. She selected the VERY same version of the Beanie Baby kitty that had been her mom’s lovie so many years before. As the lovie was in storage, the little girl couldn’t have possibly known it was the twin to her mom’s. But she picked the very one.
Tears in my eyes!
A quiet forest appears empty. But gaze long enough and…a fox spirit will magically appear before your eyes! No, its not Photoshop or camera trickery. It’s a simple physical stage illusion called 
The L shape box is consists of two sections: a “forest section” and a “ghost section.”
Next, cut a small square (approximately 1.75″ x 1.75″) in the side of the box that faces the forest section. This is your viewfinder.
In the book, Arlo gazes through a slipknot, a loop of rope or lacing that allows him to see and travel multidimensionally. In order to replicate that rounded view, we slid a 2.25″ piece of toilet paper tube into the viewfinder as well.
Now draw a backdrop for the wall opposite the viewfinder. I had the kids decorate a pre-cut piece of paper or cardboard, then we glued it to the inside of the box.
Next, sketch a ghost on a piece of white card stock. Here’s my tribute to Fox, a spirit from the book (and my favorite character):
Tape the ghost in the ghost section of the Pepper’s Ghost box. Though you will probably need to do a little adjusting on the exact placement, try to arrange the ghost in the center of the section. I found this gave the best results.
Now for the magic! A Pepper’s Ghost illusion is essentially a reflection. For this model, the reflection is caused by a piece of glass or clear polystyrene set at a 45 degree angle in the junction of the L shaped box.
During my initial test, I used a piece of glass from a 4″ x 6″ picture frame. However, I was a little uncomfortable giving multiple 6-8 year-old kids pieces of glass to take home. Luckily, I found clear polystyrene sheets on Amazon (a set of ten, 8″ x 10″ sheets cost $15). Polystyrene is plastic, lighter weight, doesn’t shatter, and you can cut it down to size with a box cutter or scissors. Testing revealed that the reflection illusion works just as well with polystyrene as glass. Yay!
Then hinge a second square of cardboard over the ghost section. It’s important that this flap open and close. With the flap closed, the ghost will not appear through the viewfinder. But when you lift the flap, the ghost section will illuminate, causing a reflection to appear.
Ready to see the illusion in action? Close the flap and peer through the viewfinder. Keep gazing through the viewfinder, then lift the flap over the ghost section. Your ghost will magically appear! I also encouraged kids to stick their hands in the forest section and try to grab the ghost. Their fingers passed right through it, of course!
Recently, the 
For the calligraphy activity, we purchased both traditional feather quill pens and metal nib quill pens on Amazon, along with bottles of ink. Katie printed different examples of calligraphy so kids could replicate some letters. We also had calligraphy pens and brush pens in rainbow colors. Everyone loved trying the pens, and the calligraphy wasn’t just limited to the English language…
We also had a massively popular typewriter petting zoo. There were 5 typewriters in all, 2 working, 2 non-working, and 1 toy for the really little kids. Kids could touch, explore, and clatter away on them! Katie and I were a wee bit worried about how loud the zoo would be, but quickly learned that the sound of multiple typewriters is actually incredibly soothing (at least to us!).
The final activity was something I’ve been wanting to do ever since I spotted in on the 
The steps for the activity are as follows: Firs, use a tool to carve a design into a foam sheet. The tool can be a pen, pencil, or wooden scratch art styluses. The foam sheets are the same material that meat is packaged on. We bought thinner versions on Amazon (Presto foam printing plates, a 100 pack of 6″ x 4″ sheets is $15).
Next, roll paint over your engraved foam sheet. We used trays to reduce the mess. They were definitely helpful!
Finally, place a piece of paper on top of your painted engraving and run it through the pasta machine printing press. Peel the foam sheet and the paper apart, and you have a beautiful custom print!
Important! Make sure the pasta machine is set to a wider setting. As you can see in the photo below, if the machine setting is too narrow, the paint will just squish into the lines of your engraving. The wider setting allows to white lines of your design to appear.
Also, make sure kids know that if they want to print words, they have to carve them backwards as the printing process reverses the carved image. And you might want paper plates handy so kids can transport their still-damp prints home.