The Dentist is In

the dentist is inMost people don’t put the words “dentist” and “fun” in the same sentence, but here at Pop Goes the Page, you’ll find that fun is indeed possible with this neat-o set of dentist tools and peppy patient!

We read Doctor De Soto by William Steig. Doctor De Soto is a mouse dentist who works on creatures both big and small. He draws the line, however, at patients who snack on mice. But when a truly miserable fox shows up at the office begging to be let in, Doctor De Soto and his wife (who also happens to be his assistant) decide to treat him. During the procedure, it becomes quite apparent that the fox intends to eat them when he feels better. So Doctor De Soto and Mrs. De Soto come up with a clever plan to outfox the fox.

For the patient, you’ll need:

  • 1 box for the head (mine was 4” x 4” x 4”)
  • A box cutter
  • 2 rectangles of white card stock for upper and lower teeth (approximately 1.25″ x 4″)
  • 4 rectangles of red poster board for gums (approximately 1″ x 4″)
  • 12 rectangles of white card stock for molars (approximately 1″ x 1.25″)
  • 1 rectangle of red construction paper for tongue (approximately 1.5″ x 4.5″)
  • 1 triangle of white poster board (mine was roughly 5.5″ x 5.5″)
  • Black, red, yellow, brown or red construction paper for hair
  • 2 jumbo pom-poms (mine were 2″)
  • 1 Styrofoam packing peanut
  • 2 black dot stickers
  • 2 squares of white card stock for ears
  • Scissors and tape for construction
  • Markers for decorating
  • Hot glue

For the dental tools, you’ll need:

  • 1 box for the dental bag (mine was 2” x 4” x 4″)
  • 1 rectangle of silver poster board for handle (mine was 1.5″ x 6.75″)
  • 1 wooden clothespin
  • 2 small rectangles of silver poster board for the forceps (approximately .75″ x 3.75″)
  • 1 sparkle stem
  • 2 craft sticks (mine were 4.5″ long)
  • 1 Styrofoam packing peanut
  • A selection of color masking tape
  • 2 small rectangles of mirror board  for silver fillings (approximately 1″ x 1.25″)
  • 2 small rectangles of gold paper for gold fillings (approximately 1″ x 1.25″)
  • 1 small circle of mirror board (mine was 1.25″ in diameter)
  • 1 piece of string for floss (mine was 17″)
  • Some reward stickers
  • Tape and scissors for construction
  • Markers for decorating
  • Hot glue

We’ll begin with your patient! Use the box cutter to cut a slit in the front of the box. Carefully inset scissors into the slit and cut three sides of the box. Leave one side intact as the “hinge.”

box stepsPrepare the upper and lower teeth by cutting “tooth bumps” on the card stock rectangles like so:

tooth bumpsThen hot glue the upper and lower teeth inside the mouth.

upper and lower teethThis is also a good time to hot glue the red poster board “gums” inside the mouth. Since you’re basically creating a pocket for the teeth, only glue three sides of the gums. The top of the gums should remain glue free.

gumsTo create the tongue, round one edge of the construction paper rectangle and hot glue (or tape) inside the mouth.

tongueTo make “molars,” round the edge of each white card stock rectangle, and slide them into the upper and lower gum pockets.

molarsThe mouth is done, now for the rest of your patient! Let’s revisit “Mr. Smiley” before we get started…

patientUse construction paper fringes to create hair and tape it to the top of the box. Hot glue two jumbo pom-poms on the top of the box for eyes and a Styrofoam packing peanut on the front for a nose. Stick the black dot stickers to the pom-poms for pupils, use markers to add nostrils to the nose, and shape ears out of white card stock squares and tape them to the sides of the box.

The final touch is your patient’s white poster board “shirt.” We tried a number of different shapes and determined that a triangle with rounded edges looked best:

shirtWell, this image depicts an uneven, lopsided, yet somewhat rounded triangle. But you get the idea. Color the triangle with markers, then hot glue the head to the top. Done!

Now for your delightful dental tools. I actually had to look one of these up. I mean, who knew that the “little hook thingee they scrape your teeth with” is called a sickle probe? Thank you, Wikipedia.

dental toolsBag: Decorate the box with markers. Then tab the ends of the poster board handle and tape it to the underside of the lid.

handleForceps: Hot glue the 2 poster board rectangles to the sides of the wooden clothespin.

forcepsSickle probe: Cut a 3″ segment off the sparkle stem, then curve it into a hook and tape to the end of a craft stick. You can use color masking tape or scotch tape.

sickle probeToothbrush: Snip a small piece off a Styrofoam packing peanut, then hot glue it to a craft stick. Bonus…when the Styrofoam moves across the card stock teeth, it really does sound like a toothbrush!

toothbrushMirror: Tape a 5.75″ piece of sparkle stem to the mirror board circle. Bend the sparkle stem slightly.

mirrorDental fillings: Round one edge of the silver mirror board and gold paper squares. A quick word about the gold paper squares. I unearthed this from the art cabinet:

gold paperIt’s gold hologram paper mounted on thin cardboard. If you don’t have this stuff, you can improvise with metallic crayon or markers on card stock. Just make sure to use paper that’s thick enough to withstand being played with repeatedly.

The final two pieces of the dental kit are floss (I used string, but real floss would be even cooler) and some much-appreciated reward stickers.

Ready for your check up? Not only can you examine, floss, and brush to your heart’s content, you can also remove cavities! Use black and brown markers to draw a cavity on a molar:

cavityThen insert the molar back into gums. After a quick examination with the mirror and sickle probe, use your forceps to remove the cavity and replace it with a sturdy new filling.

replacing a toothGood job! Reward your patient with a sticker, and send ’em the bill!

Over the Rainbow

storm and rainbowThis dangling storm cloud has a surprise inside. Just tug the secret loop…and release a rainbow!

We read Thunder Bunny by Barbara Helen Berger (Philomel, 2007). Thunder Bunny is a surprise to her rabbit family. She’s the littlest and last, but she’s also…blue! Curious about the sky, Thunder Bunny sails up into the clouds. A scary storm brews, but Thunder Bunny soon realizes that even thunder and lightning are part of who she is. When she returns home, her family recognize what a truly special bunny she is.

You’ll need:

The funny thing about this project is that the box’s lid, which technically is always on top is going to be the trap door at the bottom. So begin by flipping the box over so the lid is on the bottom. Then, up at the “top,” cut two small slits on each side.

prepping boxUse your scissor blades to enlarge the slits into holes (large enough to thread the elastic beading cord through). Slide the ends of the cord through the right and left holes. The ends should now be poking into the interior of the box.

ends of cordNext, use this wrapping technique to wrap and secure the cords around the craft sticks. Tape the craft sticks to the interior walls of the box.

craft sticksNext is the secret loop that will release the rainbow from the trapdoor.

secret loopFold 1/2 of a pipe cleaner into a loop and twist the ends together to secure.

twisted loopTape the loop to the inside edge of the lid.

loop on trapdoorTime to decorate the cloud! I showed the kids how to pull apart a cotton ball so it will cover more space on the box’s surface. Then I made a diagram to show kids approximately how many cotton balls they would need for each side. Otherwise, one zillion cotton balls will be glued on there. Trust me.

sneaky mathTo attach the cotton balls, squirt some white glue on the box, and then press the cotton ball on top. Repeat on all sides of the cloud EXCEPT the trap door on the bottom! That needs to remain cotton ball free so you can attach the “rain” and thunderbolts to it.

Next, use tape to attach the blue cellophane, blue shimmer ribbon, and blue curling ribbon rain to the bottom of the trapdoor. We prepped the thunderbolts in advance by using the template to trace the bolts onto mirror board (or you could skip the mirror board and just have white card stock bolts). Tape the 3″ – 5″ pieces of elastic beading cord to the back of the bolts, then tape the cords to the box.

storm cloudThe storm cloud is done, now for the rainbow! Red goes first. Attach a piece of tape to the end of the red streamer. Press the tape to the ceiling of the box, all the way to the left. Repeat with each color until you have a row of rainbow streamers from left to right.

rainbow streamersGently tuck the streamers into the box and shut the trapdoor. Suspend the cloud from its cord, then tug the pipe cleaner loop. Your rainbow will appear! Try to refrain from bursting into song.

Refraining…

Refraining…

SOOOOMEWHEEEERE…OVER THE RAAAAINBOW…

Doh!

Worth the Splurge III

box portraitI use a fair amount of boxes for my projects, and what wonderful boxes they are!

While said projects can be done with tissue or household boxes, I admittedly splurge on these 100% recycled gift boxes from Nashville Wraps (the “economy matte white” ones are shown above). Why? Oh, let me count the ways:

  1. They’re packed flat, which makes them super easy to store (and since my storage is limited, this is a huge plus).
  2. They offer a blank template to begin with (instead of having to cover a tissue box with white paper, for example).
  3. They hold up really well to marker, crayon, tape, white glue, glue sticks, and hot glue.
  4. These dandy boxes also come in brown, which I’ve used to make this adorable little produce stand, this fantastic boat hat, this splendid garden, this candy factory, this bouncy bed, and this creepy carrot basket.
  5. They’re 100% recycled! And I love me some recycling.

So, how much of a splurge are these boxes? Well, if you want to buy a case of the white 4 ½” X 4 ½” x 9” size (which I use pretty often – see this monster feet project, this dog project, this ice cream truck, this robot marionette, and this dragon), you can buy a case of 100 for $26.50. That’s 27 cents a box. Pretty good!

They come in different sizes of course. I used a white 4″ x 4″ x 4″ box for this dentist project, this hot air balloon project, and this floating island. You can buy a case of 100 for $15.90 or, 16 cents a box.

Shipping can add some cost. The good news, however, is that Nashville Wraps offers flat rate or free shipping (plus a small handling fee) when your order reaches certain levels. I take advantage of this by estimating what I need for a year and placing one BIG order to get a break on shipping. The cases of boxes easily stack in a closet or under a table. Nice!