Wish Fish

wish fishA goldfish is a lovely pet…unless, of course, you had your heart set on a pony. But what if the fish could talk and grant you a wish?

We read The Birthday Fish by Dan Yaccarino (Henry Holt and Co., 2005). More than anything else, Cynthia wants a pony for her birthday. Every year, she wishes for a birthday pony, and every year, she gets something else. This year, as Cynthia blows out her candles she wishes for a pony called Marigold. She gets a goldfish. Upset, Cynthia is about to pour the fish down the drain when it speaks! The birthday fish will grant her wish, but first she must take it to the lake and set it free. So Cynthia loads the fishbowl in her toy stroller and departs for the lake. During the journey, they meet and overcome many obstacles (bumpy roads, hungry cats, hot sun, etc.). At last, they arrive at the lake and…Cynthia decides she’d rather keep her new friend. She names him Marigold.

You’ll need:

  • 2 large clear plastic plates (mine were 10″ in diameter)
  • 1 small tissue box
  • A couple cups of uncooked rice (or aquarium gravel)
  • fish and castle template printed on a piece of 8.5″ x 11″ white card stock
  • 2 small paperclips (mine were 1.25″)
  • 1 large paperclip (mine was 2″)
  • Green construction paper
  • Fish decorating supplies (I used orange & yellow construction paper, cello sheets, crepe paper streamers, embossed foil paper, and patterned paper
  • A 5″ piece of clear clear elastic beading cord
  • Scissors, tape, glue stick and stapler for construction
  • Markers for decorating

We’ll begin with your fabulous fishbowl! Place 2 clear plastic plates rim-to-rim like this:

rim to rim plates Then tape the lower half of the plates together. Don’t tape the entire thing because you still need to put things inside your fishbowl!

taped-plates-3Now for the base. Cut a small tissue box in half. Recycle the bottom half. You now have a 2.5″ base with an opening at the top.

tissue box cut downIf there is any plastic around the opening of the tissue box, remove it. Then, on both sides of the box, cut from the opening to the edge of the box. Then cut diagonally downward into the sides of the box. This leaves your base looking like this:

cut baseDrop your fishbowl into the base. You might have to do a little cutting and adjusting to get the fishbowl to sit upright snugly. Secure the fishbowl to the base with tape. Pour some uncooked rice in the opening at the top of the plates. This is the “sand” for your fishbowl.

rice in baseNow for some fish-friendly decor! Both the castle and the aquatic plant are anchored in the rice by paper clip “stakes.” We’ll start with the castle. Color and cut the castle from the template. Make sure you keep it in once piece (later, you’ll fold it so it can be viewed from both sides of the fishbowl).

Flip the castle over and tape two small paperclips to one side. You’ll notice that I taped just the very tops of the paperclips to the castle. This is so there would be plenty of paperclip  to stick into the rice. Fold the castle in half and tape it closed.

castle tapedTo make the aquatic plant, cut 3 curvy plant pieces out of green construction paper. Make sure they don’t exceed 6″ in height (otherwise, they start to tip over in the fishbowl). Staple the 3 pieces together, then tape a large paperclip to the bottom.

stapled and taped plantOpen the top of your fishbowl and gently push the castle and aquatic plant paperclip stakes into the rice. I recommend placing the castle all the way to the right, and the plant all the way to the left to make room in the middle for your dangling fish.

And now…the fish! Cut and color the fish from the template. Like the castle, the fish is double-sided. So leave it all in one piece.

Flip the fish over to the blank side and decorate. I offered construction paper, cello squares, crepe paper streamers, embossed foil paper, and patterned paper in hues of orange and yellow. When you’re done decorating, tape a piece of elastic beading cord to one side of the fish:

fish with taped cordThen fold your fish over and tape it closed (to make my fish plump, I taped it shut using tape loops). Next, dangle your fish in the fishbowl, adjust for height, and tape the free end of the cord to the outside of the bowl. Tape the top half of the fishbowl closed. Done!

wish fishIf you have a little extra time, I suggest playing “Pin the Tail on the Goldfish” before taping your fishbowls completely closed. I whipped up a simple game poster and made some construction paper fish tails. A white bandana served as our blindfold (and kids who didn’t like things over their eyes had the option of simply closing their eyes).

pin the tail on the fishThe prize for playing – regardless of where the tail was pinned – was a lovely little sea shell for your fishbowl. The shells were dropped in and THEN we taped the fishbowls securely closed. There was some spilled rice, but a quick vacuuming took care of that.

Still hankering for a pony? Perhaps you should check out this post.

Find Somebunny

find some bunnyEvery magic show needs a rabbit…unless that rabbit pulls an unplanned disappearing act! Luckily, some glittering stars will help you find your friend!

We read The Magic Rabbit by Annette LeBlanc Cate (Candlewick, 2013). Ray is a street magician, and Bunny is his faithful assistant and best friend. The two friends do everything together. One day, however, Ray’s magic act is interrupted by a passing juggler. In the chaos, Bunny is chased by a dog and lost. Bunny searches and searches, but he just can’t seem to find his friend. As darkness falls, Bunny begins to despair. Enticed by a bag of popcorn, he suddenly notices a glittery star on the ground. It’s one of Ray’s stars! One by one, bunny follows the stars until he sees a very familiar figure on the subway platform. Reunited, the two friends walk home together.

You’ll need:

  • 1 large oatmeal container
  • White construction paper
  • A square of white poster board for feet (approximately 6.5″ x 6.5″)
  • 2 rectangles of white poster board for paws (approximately 1.75″ x 3.25″)
  • 6 twisteez wire (or pipe cleaners) for whiskers (approximately 3.5″ long)
  • 2 wiggle eyes
  • 2 white cotton balls
  • 1 medium pom-pom for nose (mine was 1″)
  • 2 white construction paper rectangles for the ears (approximately 2″ x 6.75″)
  • A rectangle of construction paper for hair tuft (approximately 2.5″ x 3″)
  • A strip of felt, any color (approximately 1.25″ x 4.25″)
  • 1 large pom-pom for tail (mine was 1.5″)
  • A magic star template, printed on 8.5″ x 11″ card stock
  • A black plastic top hat (optional)
  • Scissors, tape, stapler for construction
  • Markers for decorating
  • Hot glue

This story time project involves making a rabbit, decorating some magical stars, and then finding your glittery stars in our gallery. We’ll start with…the magic rabbit.

finished rabbitWrap the oatmeal container with white construction paper. Cut feet from the square of white poster board. I recommend rounded feet with like the ones below (I used marker to add some “toe lines”).

feetHot glue the feet to the bottom of the container. To make whiskers, curl one end of each twisteez wire (or pipe cleaner), and tape them to the front of the container like so:

face step 1Then hot glue two white cotton balls over top of the whiskers. Hot glue a small pom-pom on top of the cotton balls, and top everything with two hot glued wiggle eyes.

face step 2Next, cut paw shapes out of the small rectangles of white poster board, and draw little toe lines on them. Tab the ends and hot glue (or tape) them to the front of the rabbit.

paw stepsFor ears, round the ends of the 2 rectangles of white construction paper, use markers to add some color, then staple at the bottom. Hot glue (or tape) them to the rabbit.

ear stepsFor a snazzy bow tie, knot a strip of felt and round the ends with scissors if needed. Hot glue to the rabbit.

bowtieFinish everything off with a jumbo pom-pom tail, also adhered with hot glue. I had some extra black plastic top hats lefts over from this project and this project, and they worked really well as rabbit carriers. Set your rabbit aside for the moment.

Next up, magic stars! Each kid received 4 blank magic stars, printed from the template. Then I brought out the Bling Bin and encouraged kids to use markers and the Bling Bin materials to decorate the stars. As you can see, the results were VERY magical.

lots of magic starsWe collected all the stars, sent the kids off to a secluded part of our gallery, and asked them to cover their eyes while we hid all the stars in the gallery. Apparently, those plastic top hats made for some pretty good blindfolds!

waiting in treeWhen the stars were hidden, kids and rabbits went star-seeking in the gallery! Then the rabbits, hats, and stars went home for more games of magical hide and seek.

Perhaps you’re ready to try a magic show of your own? Look no further than this post!

Incredible Illusions

incredible illusionsBehold the mystery…the wonder…the spectacle…of your very own mini magic show!

magic tricksThis project was the culminating event at To Be Continued, our weekly story time for 6 to 8-year-olds. Every week, we read from a chapter book and celebrate the the end of the entire book with a project and/or activity.

We read Horten’s Incredible Illusions by Lissa Evans (the sequel to Horten’s Mechanical Mechanisms (Sterling Children’s Books, 2012)). Young Stuart Horten moves to the town of Beeton and expects to be thoroughly bored. However, he soon discovers that he is part of a magical legacy left by his Great Uncle Tony, who was a stage magician and illusionist. In the first book, Stuart and his friend April solve a series of complicated clues and find Uncle Tony’s secret workshop. In the sequel, the friends again embark on a journey. This time, they’re searching for Great Uncle Tony’s will, which bequeths the contents of his workshop to whoever finds the document first. Clues are hidden in each of his magical stage illusions, but…the magical worlds inside the illusions are real and in some cases, dangerous. And Stuart and April aren’t the only one interested in getting their hands on those tricks.

We definitely needed some incredible illusions to celebrate the conclusion of these awesome books. I designed these individual mini magic shows to be easy enough for 6-year-olds to do, but intriguing enough for 8-year-olds. After consulting a number of children’s magic books, I found Amazing Magic Tricks: Beginner Level by Norm Barnhart (Edge Books, 2008) to be the most useful. The 4 tricks described in this post are from this book.

You’ll need:

  • 1 memory box (more about this below)
  • A 10.5″ piece of PVC pipe (05.” in diameter)
  • A selection of color masking tape
  • 1 paper cup
  • 1 paper (or fabric) flower
  • 1 empty seed packet (or small envelope simply marked “Magic Seeds”)
  • A 9″ x 12″ piece of felt (I used the glitter variety)
  • hat rabbit carrot template printed on 8.5″ x 11″ card stock
  • 1 Styrofoam coffee cup
  • A selection of foil star stickers
  • 2 playing cards
  • A 1″ foam paintbrush (or regular paintbrush)
  • Scissors and tape for construction

You’ll need a box with a lid to store your tricks and shield your hands from the audience as you prepare your tricks. A memory box is perfect for this. I purchased mine at Michaels Craft store. I went with black, but they come in all sorts of colors and patterns.

memory boxDecorate the lid of your box however you like (I found some self-adhesive glitter foam stars in the clearance section at the craft store) then slide the lid onto the box like so. This creates a “screen” and a “backstage” area to prep your tricks.

magic boxNext, wrap color masking tape around the PVC pipe. Your magic wand is ready!

wandTRICK #1: HIDDEN FLOWER

The most important thing about this trick is making sure the flower is small enough to hide in your fist. I purchased 1.25″ paper flowers for the kids (scored on discount from the scrap booking section of the craft store).

flowerBehind your box’s screen, grab the flower in your fist. Then use the same hand to hold the paper cup with your fingers.

flower trick 1To perform the trick, show the audience that your cup is empty. Then say “Oh no! It’s empty. Well, good thing I have some stupendous magic seeds!” Pick up the empty seed packet and pretend to pour seeds into the cup.

flower trick 2Wave the wand around muttering magical incantations. While the audience is distracted by the wand, open your fingers and drop the flower into the cup. Shout “Ta da!” and show them that a flower has magically appeared!

flower trick 3TRICK #2: FIND THE RABBIT

Print the hat, rabbit, carrot template. Fold and tear the strip in 2 places, like your see below. It’s really important that your TEAR the strip. Don’t cut it with scissors!

rabbit trickTo perform the trick, hold up the 3 image cards and say “You see a hat, a rabbit, and some carrots, but with my amazing magical skills, I will pull the rabbit from under this cloth every time!” Turn your back and have an audience member arrange the 3 image cards on the table and cover them with felt.

rabbit trick 2Reach underneath the felt and feel the edges of the image cards with your fingers.

rabbit trick 3The rabbit will be the only image card with two torn edges. Remove it from under the cloth with a flourish! Repeat with a difference audience member. Astounding!

rabbit trick 4TRICK #3: BALANCING CUP

First, decorate a Styrofoam cup with foil star stickers. Next, cut a playing card in half, lengthwise. Tape one half of the cut playing card to the back of another card. The half of the playing card should “hinge” outward like so

cup trick 1To perform the trick, flatten the hinge to the card and hold it up to your audience, keeping the taped side facing your body. Invite an audience member to come forward and try to balance the Styrofoam cup on top of the card. Then say “You see it is impossible. But I will now use magic to make the impossible, possible!”

While you’re talking, sneak a finger up the card and open the hinge on the back, forming an area for the cup to balance. From the side, it looks like this:

cup trick 2But from the front, it looks like the cup is now balancing on the card!

cup trick 3TRICK #4: MAGIC GLUE

To perform this trick, tell the audience that you have magic glue. Hold up a paintbrush and Invite an audience member to come up and “paint” your hand with the magical glue. For my version of the trick, we used 1″ foam paintbrushes I had left over from another program.

wand trick 1Now hold the wand in your “glued” hand. Say “Observe my stupendous magical glue!” Extend your arm across your body and out to your side, still grasping the wand. Next, wrap your free hand around the wrist of your wand hand. Slowly and dramatically, lift each finger from the wand until you no longer appear to be holding it.

wand trick 2But you are holding it of course. Because when you grasp your wrist, you sneak a finger behind your wand hand and hold the wand like this:

wand trick 3Now have the audience clap once to have the wand “detach” from the magic glue. Carefully lift your finger to release the wand, and let it fall dramatically to the floor. Take a big bow.

The kids absolutely loved this project. I performed the whole show first, and then I deconstructed all the tricks and each kid made his/her own set. If, by the way, you’d like to see the awesome mechanisms we made after reading Horten’s Miraculous Mechanisms (the first book in this set), click here.

In May 2015, I interviewed Lissa Evans about her fantastic books. If you’d like to hear it, click here!