Fox Trot

fox with wagonRoll out the red wagon…this little fox is going to market! We made tissue box wagons, grabbed our shopping lists, and headed to the market to play a vegetable matching game. Sporting fox ears and tails, naturally.

We read Red Wagon by Renata Liwska (Philomel Books, 2011). Lucy the fox has a new red wagon and a big job to do. She must take her mother’s list to market and buy some groceries. Lucy sets off with her animal friends, and while they do eventually bring the veggies home, they also have adventures as the red wagon transforms into a boat, covered wagon, caravan, train, rocket ship, and construction vehicle. After Lucy’s big day, the red wagon serves one final purpose…a place to take a nap!

You’ll need:

  • 1 large tissue box
  • Red and white construction paper
  • 1 wheel assembly for the wagon (more on this below)
  • 2 drinking straws (our were 10″ long)
  • An 16.5″ piece of string
  • 1 small rectangle of tagboard (approximately 1.25″ x 2″)
  • As many veggies templates as you need, printed on 8.5″ x 11″ card stock
  • 1 set of veggie market signs, printed on 8.5″ x 11″ card stock (color version here)
  • As many shopping lists as you need, printed on 8.5″ x 11″ paper
  • Red poster board
  • Scissors, stapler, glue, and tape for construction
  • Markers for decorating

finished red wagonWe’ll begin with the little red wagon! Cut a large tissue box down to 1.75″ inches tall, then wrap with red paper. Next, attach the wheels. We went with our classic assembly of drinking straw pieces, bamboo skewer axles, and plastic wheels from Kelvin Educational. We hot glued foam beads on the outsides of the wheels to keep them from sliding off the axles as well. Here’s a shot of the underside of the wagon with the finished wheel assembly:

under red wagonYou can also substitute wooden or cardboard wheels. Or hot glue shortened paper towel tubes the bottom of the box to suggest wheels, and drag the wagon on the fixed tubes.

For the wagon’s handle, you can use a simple pull string, or you can make a drinking straw handle like we did. To make our handle, thread an 16.5″ piece of string through a drinking straw. Pull 1″ of string out of the straw, fold it down, and tape it to the side of the straw. The other end of the string should extend, unattached, from the opposite end of the straw.

handle assembly step 1Next, cut two notches the center of a 1.25″ x 2″ piece of tagboard. This is the anchor for your wagon handle. Wrap the string around the notches in the tagboard, but don’t wrap all the string around it! Leave 1″ of string between the tagboard and the end of the straw. This will allow the handle to move left and right while you’re pulling your wagon.

handle assembly step 2Bend a second drinking straw into 3 sections, pinch the ends together to form a triangular grip on the handle, then tape the ends of the straw firmly together.

handle assembly steps 3-5Fold and slide the taped section of the handle into the open end of the first straw. Cover the taped string with colored masking tape if you like (I used black in the photo below).

handle assembly steps 6-7Here’s what a finished wagon handle looks like. A drinking straw handle, a 1″ gap of string, and a tagboard anchor wrapped with the remaining string.

finished handle assemblyTape the tagboard anchor to the front interior of the wagon. Done!

taped tagboard on wagonTo make your fox costume, circle a strip of red poster board around your head, then staple it. Cut a pair of fox ears from red poster board, and add white construction paper ear interiors. Staple the ears to the headband. We attached our ears close to the front of the headband, and tilted them upwards slightly. Somehow, that just looked more foxy.

fox earsNext, cut a 6″ x 22″ rectangle of red poster board into a fox tail shape. Glue a little brush of white construction paper on the end of the tail, and tab the top. The tab slides inside the waistband of your pants (if you’re wearing a dress, punch two holes in the top of the tail, thread string through them, and tie the string around your waist).

tabbed fox tailYour wagon and costume are finished…now to market! The matching game is very simple. Print the market signs, then put each sign next to the corresponding veggies from the template. I used 8″ table card holders (which you first met in this sneaky math post), and had little plastic baskets for the veggies. We had eight market stops in total, all scattered around the library’s main lobby.

market signThen we gave each kid a shopping list. You’ll notice the lists are all slightly different. This was to avoid everyone rushing to the same area at once, like some sort of vegetable / woodland creature version of Black Friday. We also gave kids little shopping bags (basically, a brown paper lunch bag cut down to 4″). Following their lists, the kids located the matching sign, loaded the vegetable in their wagons, and checked it off their shopping lists.

at the marketOnce they had all their vegetables, they pulled everything back to the project area to color the vegetables and customize their paper bags!

market shopping list