Glow, Pumpkin. Glow!

pumpkin-balloonA no mess, no carve, no flame, gorgeously glowing pumpkin? You got it! Bounce these LED pumpkin balloons around at your next story time, sneak a few on the shelves on the 31st, or take a spirited evening stroll.

You’ll need:

  • 1 orange LED balloon
  • A black Sharpie permanent marker

I first spotted these LED balloons at JaZams, our local toy store. They’re made by a company called illooms. A variety pack of 5 latex balloons cost $6 , and a pack of 15 balloons cost $13. I’ve also seen illooms sold online at Oriental Trading Company, Amazon, and Walmart for varying prices. Party City sells just the LED bulbs (12 for $10). So that’s an option as well – buy the bulbs and a package of orange balloons.

illoom-led-balloonsThe illooms LED balloon has a round, hard tip at the top, and a tab sticking out of its neck. Pinch the tip while simultaneously pulling the tap to activate the LED. Then inflate the balloon (the directions suggest a pump, but I went with my lungs).

deflated-balloonThe round tip acts as a balloon weight that pulls the inflated balloon upside down, creating the the perfect pumpkin shape. Use a black Sharpie permanent marker to draw a pumpkin face on the balloon, and you’re good to glow!

Looking for a few more simple Halloween projects? Try a toilet paper roll jack-o’-lantern, a hanging bat exhibit, a shoulder snake, or an herbal amulet to ward off those pesky goblins. And as long as were talking about spooky orange vegetables, take a look at this Creepy Carrots story time.

way-creepy-carrots

Purrfect Pet

purrfect petRecently, it occurred to me that we’ve done story time projects with dogs, monkeys, chicks, ponies, mice, hamsters, butterflies, birds, crocodiles, bugs, rabbits, and chickens in hot air balloons…but no CATS! To correct this egregious oversight, I present you with the purrfect cat story time.

We read Hookwinked by Arthur Howard (Harcourt, 2001). Mitzi (who is a witch) adores creepy things. So when it’s time to find a pet, she heads to the creepiest store in town. She selects a toad. But all the toad wants to do is eat bugs. She returns the toad and gets a pair of bats. But all the bats want to do is hang out with each other. She returns the bats and leaves the store, completely discouraged. The next day, however, there’s a scratch at her door. It’s an adorable little kitten. Naturally, Mitzi is disgusted by the kitten’s cuteness, but she agrees to let it stay one night because it’s raining outside. That night, the kitten stays by Mitzi’s side as she hunts ghosts, purrs on Mitzi’s lap during a scary movie, and licks Mitzi’s chin when she reveals her deepest fears. Mitzi’s heart is won, and she realizes that looks aren’t everything!

You’ll need:

  • 1 small oatmeal container
  • Construction paper
  • A rectangle of tagboard (approximately 4.25″ x 6″)
  • 3 pieces of twisteez wire (or very thin card stock strips) approximately 4.5″ each
  • A small rectangle of self-adhesive foam (approximately 1.25 ” x 1.5″)
  • 2 wiggle eyes
  • A 16″-18″ piece of ribbon
  • A small circle of card stock (approximately 1.5″ in diameter)
  • Scissors, tape, and glue stick for construction
  • Markers for decorating
  • Hole punch
  • Hot glue

First, wrap your oatmeal container in construction paper (we offered black, white, orange, and gray). Cut the hind feet out of a tagboard rectangle, then glue the tagboard to your choice of colored construction paper. Trim the construction paper to fit the tagboard feet. Your tag board hind feet are now covered with construction paper on one side.

back feet stepsSet the feet aside for a moment, and cut a tail out of your choice of colored construction paper. Our tails were 2.25″ x 12″ rectangles and they looked great. Round one end of the rectangle, then wrap the tail around a marker to give it an awesome curl.

Hot glue the hind feet to the bottom of the oatmeal container, then hot glue to tail on top of the feet. To keep the tail anchored and less likely to tear off, I suggest hot gluing at least 3″ of it to the feet.

glued feet and tailTo create your cat’s front feet, cut two, 1.5″ x 4.5″ rectangles of construction paper, round one end of each rectangle, and then fold the rounded ends up to create paws. Hot glue (or tape) the legs to the front of the oatmeal container.

front legs attachedTo make the cat’s furry bib, cut a 4″ x 4.25″ rectangle of construction paper into an upside-down bell shape, then cut little ripples on the edges to create “fur.”

bibHot glue (or tape) the bib to the front of the cat. Make sure the bib covers the tops of the front legs, but also leaves room for your cat’s face.

bib attachedUse a marker to draw a smile on your cat and little “toe lines” on it’s feet (metallic Sharpie markers work great on black construction paper). Next, bunch together 3 pieces of twisteez wire (or 3 very thin card stock strips) and tape them over the mouth like so:

whiskersCut a piece of self-adhesive foam into a cat nose and stick it over the whisker tape. Hot glue a pair of wiggle eyes above the nose, and hot glue (or tape) a pair of construction paper ears next to the eyes.

nose, eyes, and ears The final touch is your cat’s name tag. Punch a hole in a circle of white card stock, then decorate the circle with your cat’s name. Thread a piece of ribbon through the hole and tie the ribbon around your cat’s neck. Invite a few friends over for a grand night out.

purrfect gangAnd there you have it…a splendid cat story time! I wonder what animal’s next? We’ve already covered flamingossquirrelslong-haired rainbow yaks

Jack-O’-Lantern

jack o lanternThis plump little pumpkin is made out of a roll of toilet paper! I spotted this project in FamilyFun magazine years ago. Their version was undecorated, and they used fabric and felt for the body and leaves. I needed to use cheaper materials, so my version is made with a piece of plastic tablecloth and construction paper. I also went a step further and decorated the front with a grinning jack-o’-lantern face!

You’ll need:

  • 1 roll of toilet paper
  • A piece of orange plastic table cloth (approximately 20″ x 22″)
  • Brown and green construction paper
  • 1 green pipe cleaner
  • 4 pieces of black self-adhesive foam
  • Scissors and tape for construction
  • Green marker (optional)

Place the toilet paper roll in the center of the plastic tablecloth, and tuck the tablecloth into the hole in the top of the roll. Next, curl a 5″ x 9″ piece of brown construction paper into a tube and tape it. This is your pumpkin’s stem. Stick the stem in the hole in the top of the roll.

Cut a leaf shape out of a piece of green construction paper. Make sure to leave a 2″ stem at the bottom of the leaf (because the stem needs to firmly anchor the leaf in the toilet paper roll). You can use a green marker to draw a little line on the leaf if you’d like.

pumpkin leafTuck the stem of the leaf into the hole. Curl a green pipe cleaner around a pencil, pen, or marker to make a corkscrew, then tuck it into the hole as well.

Finally, cut your jack-o’-lantern’s eyes, nose, and mouth out of black self-adhesive foam and stick them on your pumpkin (or use black construction paper pieces and tape). You can cut the foam pieces in advance, or the kids can “carve” the pieces on their own. I found a little friend in the gallery who was more than happy to demonstrate her carving skills! Awesome.

decorated jackThe nice thing about this project is that when you are done with it, you can remove the plastic and re-purpose the roll of toilet paper. Now that’s a very useful pumpkin!