Breakfast is Served

breakfast is servedStart your day out right with some toasted bread, butter, jam, and a delicious beverage. Thanks to your magic magnetic knife, preparing breakfast has never been easier (especially when there are hidden paperclips in your essential ingredients)!

magic knifeWe read Hooray for Bread, written by Allan Ahlberg and illustrated by Bruce Ingman (Candlewick, 2013). One morning, a lovely loaf of bread is born. The story follows the loaf of bread as it progresses, slice by slice, throughout the day. Breakfast for the baker’s wife, a sandwich for the baker’s boy, a snack for the ducks in the park, afternoon tea, and so on until the last crumb serves as a meal for a mouse. Hooray hooray for bread!

You’ll need:

  • 1 “toaster” box (mine was 4 ½” X 4 ½” x 9”)
  • A box cutter
  • 2 rectangles of white poster board for bread slices (mine were 5″ x 6.5″)
  • 2 jumbo paperclips (approximately 2″)
  • 1 wooden coffee stirrer
  • 1 pipe cleaner
  • 2 rectangles of self-adhesive foam (approximately 1.5″ x 2″)
  • A selection of color masking tape
  • A selection of self-adhesive foam shapes
  • 4 small pom-poms (mine were 1″ in diameter)
  • 1 large rectangle of white poster board for “place mat” (mine was 11″ x 15″)
  • A selection of patterned tape
  • 1 paper plate
  • 1 square of white paper towel (mine was  5.5″ x 5.5″)
  • 3 paper cups
  • 1 jumbo craft stick (mine was 8″ long)
  • 1 button magnet (mine was 3/4″)
  • 1 piece of aluminum foil (approximately 2.75″ x 5.5″)
  • 2 squares of yellow self-adhesive foam for “butter” (approximately 1.5″ x 1.5″)
  • 2 rectangles of purple cellophane for “jam” (approximately 3″ x 4.5″)
  • 2 small paperclips (approximately 1.5″)
  • Scissors and tape for construction
  • Markers for decorating
  • Hot glue

toasterBegin with the toaster! Use the box cutter to cut two slits in the top of the box. Then use scissors to enlarge the slits into rectangular toaster slots.

toaster slitsNext, cut bread shapes from the 2 pieces of white poster board. Make sure the top of the bread extends well past the top of the toaster. Otherwise, your bread will fall into the toaster and you’ll have to constantly fish it out (and even with a fake toaster, I hate to see kids thrusting anything that looks like a knife into anything that looks like a toaster)!

bread up topUse markers to draw crusts on your bread, and then slide a jumbo paperclip diagonally on each slice (this will create a nice, semi-horizontal surface for the magnet to attach to).

bread steps To create the toaster cord and plug, break both ends off a wooden coffee stirrer (each piece should be about 1.5″ long). Then, peel the backing off a rectangle of self-adhesive foam. Press the coffee stirrer pieces AND the pipe cleaner onto the sticky backing (making sure the smooth ends of the coffee stirrer are sticking out) like so:

plug Peel the backing off the second rectangle of self-adhesive foam and press it firmly on top of the first rectangle. Use scissors to cut the rectangles into a plug shape.

finished plugCurl the pipe cleaner “cord” around a marker to make it spiral, then tape it to one end of the box. Decorate your toaster with color masking tape and self-adhesive foam shapes. Finish by hot gluing four pom-poms on the bottom of the toaster for “feet!”

finished toasterYour toaster is complete – time to set the table!

breakfastUse markers and patterned tape to decorate your place mat, plate, and napkin. Two of the paper cups will hold your butter and jam, so you’ll need shorten these cups with scissors (my butter cup was approximately 1.5″ tall, and my jam cup was 1.75″ tall).

I hot glued the plate, napkin, and the two shortened cups to the place mat to make it easier to carry. I left the “beverage” cup and the knife unglued (and filled the beverage cup with polyester fill “milk” or “soy milk”).

To make the magic knife, wrap the bottom of a jumbo craft stick with color masking tape. Then hot glue a button magnet to the top of the craft stick (I did this step in advance to save time). Wrap the upper section of the stick with aluminum foil.

knife steps The final step is to prepare your butter and jam for the magic knife! Peel the backing off the yellow self-adhesive foam square, but don’t pull it all the way off! When you’re about halfway peeled, press the small paperclip onto the sticky back of the adhesive.

butterThen re-attach the backing to the foam square, sealing the paperclip in.

sealed paperclipTo create jam, simply tape a small paperclip to the purple cellophane.

jamReady for breakfast? Place the butter and jam in their cups, then use the magic knife to fetch the bread from the toaster, carry it to the plate, and load on the toppings!

Over the Rainbow

storm and rainbowThis dangling storm cloud has a surprise inside. Just tug the secret loop…and release a rainbow!

We read Thunder Bunny by Barbara Helen Berger (Philomel, 2007). Thunder Bunny is a surprise to her rabbit family. She’s the littlest and last, but she’s also…blue! Curious about the sky, Thunder Bunny sails up into the clouds. A scary storm brews, but Thunder Bunny soon realizes that even thunder and lightning are part of who she is. When she returns home, her family recognize what a truly special bunny she is.

You’ll need:

The funny thing about this project is that the box’s lid, which technically is always on top is going to be the trap door at the bottom. So begin by flipping the box over so the lid is on the bottom. Then, up at the “top,” cut two small slits on each side.

prepping boxUse your scissor blades to enlarge the slits into holes (large enough to thread the elastic beading cord through). Slide the ends of the cord through the right and left holes. The ends should now be poking into the interior of the box.

ends of cordNext, use this wrapping technique to wrap and secure the cords around the craft sticks. Tape the craft sticks to the interior walls of the box.

craft sticksNext is the secret loop that will release the rainbow from the trapdoor.

secret loopFold 1/2 of a pipe cleaner into a loop and twist the ends together to secure.

twisted loopTape the loop to the inside edge of the lid.

loop on trapdoorTime to decorate the cloud! I showed the kids how to pull apart a cotton ball so it will cover more space on the box’s surface. Then I made a diagram to show kids approximately how many cotton balls they would need for each side. Otherwise, one zillion cotton balls will be glued on there. Trust me.

sneaky mathTo attach the cotton balls, squirt some white glue on the box, and then press the cotton ball on top. Repeat on all sides of the cloud EXCEPT the trap door on the bottom! That needs to remain cotton ball free so you can attach the “rain” and thunderbolts to it.

Next, use tape to attach the blue cellophane, blue shimmer ribbon, and blue curling ribbon rain to the bottom of the trapdoor. We prepped the thunderbolts in advance by using the template to trace the bolts onto mirror board (or you could skip the mirror board and just have white card stock bolts). Tape the 3″ – 5″ pieces of elastic beading cord to the back of the bolts, then tape the cords to the box.

storm cloudThe storm cloud is done, now for the rainbow! Red goes first. Attach a piece of tape to the end of the red streamer. Press the tape to the ceiling of the box, all the way to the left. Repeat with each color until you have a row of rainbow streamers from left to right.

rainbow streamersGently tuck the streamers into the box and shut the trapdoor. Suspend the cloud from its cord, then tug the pipe cleaner loop. Your rainbow will appear! Try to refrain from bursting into song.

Refraining…

Refraining…

SOOOOMEWHEEEERE…OVER THE RAAAAINBOW…

Doh!

Worth the Splurge III

box portraitI use a fair amount of boxes for my projects, and what wonderful boxes they are!

While said projects can be done with tissue or household boxes, I admittedly splurge on these 100% recycled gift boxes from Nashville Wraps (the “economy matte white” ones are shown above). Why? Oh, let me count the ways:

  1. They’re packed flat, which makes them super easy to store (and since my storage is limited, this is a huge plus).
  2. They offer a blank template to begin with (instead of having to cover a tissue box with white paper, for example).
  3. They hold up really well to marker, crayon, tape, white glue, glue sticks, and hot glue.
  4. These dandy boxes also come in brown, which I’ve used to make this adorable little produce stand, this fantastic boat hat, this splendid garden, this candy factory, this bouncy bed, and this creepy carrot basket.
  5. They’re 100% recycled! And I love me some recycling.

So, how much of a splurge are these boxes? Well, if you want to buy a case of the white 4 ½” X 4 ½” x 9” size (which I use pretty often – see this monster feet project, this dog project, this ice cream truck, this robot marionette, and this dragon), you can buy a case of 100 for $26.50. That’s 27 cents a box. Pretty good!

They come in different sizes of course. I used a white 4″ x 4″ x 4″ box for this dentist project, this hot air balloon project, and this floating island. You can buy a case of 100 for $15.90 or, 16 cents a box.

Shipping can add some cost. The good news, however, is that Nashville Wraps offers flat rate or free shipping (plus a small handling fee) when your order reaches certain levels. I take advantage of this by estimating what I need for a year and placing one BIG order to get a break on shipping. The cases of boxes easily stack in a closet or under a table. Nice!