Fish in a Suitcase

not normanWe read Not Norman: A Goldfish Story, written by Kelly Bennett, illustrated by Noah Z. Jones (Candlewick, 2008). A little boy is terribly disappointed when, instead of a dog or cat, he gets a goldfish for his birthday. However, Norman the fish’s goofiness, appreciation for the boy’s tuba playing, and his friendly presence when there is a scary noise at night wins the boy over. Now, he wouldn’t trade any pet in the world for Norman!

The boy pulls Norman around in a little red wagon, but I thought we’d go even more portable for our story time. Hence, a fish in a suitcase!

You’ll need:

  • 1 box with a window (I used a 7″ x 7″ x 3″ pastry box)
  • Blue construction paper
  • 2 green pipe cleaners
  • 4 pieces of green raffia
  • A selection of crepe paper streamers
  • Small shells (optional)
  • Orange poster board for fish
  • 1 piece of orange self-adhesive foam
  • 1 wiggle eye
  • Hot glue
  • 1 small piece of clear elastic beading cord
  • Markers, yellow cellophane, and golden paper for decorating
  • Scissors and tape for construction
  • 1 tagboard strip for suitcase handle (mine was 12″ x 2″)
  • 1 luggage tag (optional)

The key to this project is finding a box with a window. I had a bunch of pastry boxes left over from another program, but you can find something similar in the bakery section of your local supermarket.

Cut the blue construction paper to fit the back of the box and secure with tape (or a glue stick). Draw in a few bubbles and waves with markers. The “water” is done…time to add some aquarium plants!

Plant #1: Cut two green pipe cleaners in half. Bunch the four pieces together and twist at the bottom. Give the pieces a little curl if you so desire. Then bend the twisted part into a “foot” and tape it to the bottom of the aquarium.

plant 1Plant #2: Knot four raffia pieces together. Tape to the bottom of the aquarium.

plant 2With the plants in place, it’s time for your “aquarium sand.” Crumple up some crepe paper streamers to give them a “sandy” texture, then hot glue them around the plants and the bottom of the aquarium. You can hot glue some little shells on the “sand” as well.

Now for the fish! Cut a fish shape out of orange poster board. To create fantastic fish lips, cut the piece of orange self-adhesive foam into an oval:

fish lips 1Then peel and stick it on the fish’s mouth:

fish lips 2Use scissors to cut a smile!

fish lips 3Secure a wiggle eye on with a dash of hot glue, then tape the elastic beading cord to the back of the fish. Decorate with yellow cellophane, gold paper, and markers. When the fish is complete, dangle it from the elastic cord, adjust for height, and tape the cord to the top/lid of your aquarium. Get the height just right, and your fish will wiggle and sway in a realistic way.

To turn the box into a suitcase, simply add a tagboard handle to the top. Originally, I used hot glue to attach the handles to the box, but they popped off pretty fast. So I would recommend using brass fasteners to really secure it.

With the handle in place, all your suitcase needs is a “luggage” tag. Write your new friend’s name on it and get ready for adventure!

Ice Cream for All

truckBecome an ice cream entrepreneur! The lid of this fabulous pull toy opens to reveal a delicious variety of flavors to serve to your happy customers.

compositeIn addition to being simple, this project is highly portable. This summer, I brought it to a reading program hosted at the community pool and it was a big hit.

We read Issac the Ice Cream Truck by Scott Santoro (Henry Holt & Company, 1999). Issac is a relatively happy ice cream truck, but he can’t help fretting that other trucks seem to have more important jobs than him (lifting, hauling, moving, building). One day, a building fire traps Issac between several enormous fire trucks. After the fire is put out, the hardworking firemen (and firewoman!) are delighted to see a little ice cream truck waiting for them. Isaac realizes that he does have an important job after all…making people happy.

You’ll need:

  • 1 box. I used a 9” x 4 ½” X 4 ½” box
  • An ice cream truck template, printed on 8.5″ x 11″ card stock.
  • 4 black poster board wheels
  • Hot glue
  • 1/2 pipe cleaner
  • 1 jingle bell
  • 1 long piece of curling ribbon
  • Markers for decorating
  • Scissors and tape for construction

For the ice cream:

  • 1 cone water cup
  • 1 sheet of tissue paper (mine was 20″ x 29″)
  • Masking tape
  • 1 small pom-pom (mine was 1/2″)
  • 3 toilet paper tubes
  • Construction paper and/or patterned paper
  • 3 medium-sized craft sticks
  • Hot glue
  • 1 small plastic cup (mine was a 3 ounces)
  • 2 jumbo pom-poms (mine were 2″)
  • 1 small plastic spoon (or mini craft stick)
  • Crayons for decorating
  • Scissors and tape for construction

Start by using markers to customize your ice cream truck template. Cut and tape to the box. Then add the wheels. You can tape the wheels, or use hot glue to make them extra secure.

Next, cut a small notch in the front of the truck, right at the top. Knot one end of the ribbon and slide the knot into the notch. Then tape the knot inside the truck. This might seem like overkill, but trust me, these trucks take a real beating from their enthusiastic “drivers.”

notchNow it’s time for the bell! Bend1/2 of a pipe cleaner into an upside-down L, thread the bell on one end, then curl the end to keep the bell from falling off.

threaded bellTape the straight end of the pipe cleaner on the back of the truck like so:

bellYour truck is done…it’s ice cream time! I’ve included instructions for multiple types of ice cream, but you can modify according to your needs. For example, when I took this project to the local pool, we just did ice cream cups and single Popsicles (and I hot glued the sticks on the Popsicles in advance).

To make a cone, use crayons to color the cone water cup (marker just smeared on the cup’s semi-waxed surface). Then, take a sheet of tissue paper and gently squish it into a ball shape. Gather the bottom of the ball together and secure masking tape around it. This creates the “ice cream plug” for your cone.

ice cream plugHot glue a small pom-pom on top & pop it in the cone for the perfect finish!

cone with cherry

To make a Popsicle, wrap a toilet paper tube with patterned paper or construction paper, then hot glue a craft stick on the inside edge of the tube. To make it a double, simply hot glue two finished pops together.

popsFor an ice cream cup, drop 2 pom-poms in a 3 oz. cup and add a small plastic spoon. If a spoon isn’t handy, use a mini craft stick.

two scoops in cupA few months after I did this project, a mom made a special trip to my library to see if there was any chance of getting another truck template and box. Apparently, the ice cream truck was her son’s favorite toy, and it had finally succumbed to his various adventures with it.  She was hoping to build a new one with him. I was delighted to set her up with some fresh supplies and very flattered. You really really can’t get a better compliment than that!

Tail Spin

super stylish tailThis is an extremely simple project that, with a little prepping beforehand, a staff person can run by his or herself. And the results are fantastic!

We read Edna’s Tail by Lisze Bechtold (Houghton Mills, 2001). Edna is a cat with the biggest, fluffiest tail in the neighborhood. She spends all her time making a show of it and is only lured out of her window with the promise of a feline party in the woods. As she progresses through the woods, she gets the feeling that something is following her. Actually, it’s debris getting stuck in her fluffy tail, resulting in a display so horrifying that Edna is convinced she’s being chased by a monster. She attacks, only to discover it’s her own tail! Luckily, the other cats at the party are good-natured about the mistake, and she make a lovely new friend.

If you’re worried about how this project will go over with boys, have no fear. I gave them the option of creating a “scary monster face” like the one in the book!

You’ll need:

  • 1 strip of white poster board for headband (approximately 22 long x 2.5″ wide)
  • 2 triangular pieces of poster board for cat ears
  • 2 triangular pieces of self-adhesive foam for the ears (I offered a pink or yellow option, but you can also use markers)
  • 1/2 sheets of white poster board (approximately 22″ long x 13.5″ wide)
  • Hole punch
  • Hot glue
  • 1 long piece of curling ribbon for belt
  • Stapler, scissors, tape, and glue stick for construction
  • Supplies for decorating! In addition to items from the Bling Bin, we offered assorted pipe cleaners, crepe paper streamers, tissue paper sheets, construction paper, pom-poms, poster board strips…

For the headband, wrap the strip of poster board around the kid’s head, then remove and staple. Staple ears in the front of the headband above eyebrows. I offered a choice of pink or yellow self-adhesive foam to create some texture inside the ears, but you can also use markers.

cat headbandI also offered to hot glue a large gemstone on the front of the headband. Oo-la-la! For the tail template, take 1/2 sheet of poster board, and cut it in this shape:

tail templateYes, it does look like a lopsided, elongated lid of a potty seat. But we won’t go there.

Punch two holes at the top BEFORE decorating begins, and instruct the kids not to cover the holes while they’re decorating (otherwise, you run the risk of the curling ribbon belt not going through). Then, turn them loose on the art supplies!

We found it helpful to staple multicolored poster board and construction paper strips to the top and sides first, and then added lots of little stuff on top. You can add bulk to the tail by crumbling up tissue paper and sticking it under the poster board and construction paper strips. We also had great results with sheets of tissue paper fringed and hung below and off the sides.  I had my hot glue gun ready and waiting in case there was something that needed extra reinforcement.

When the tail is finished, run the curling ribbon through the two holes and then tie it around the waist! Just look at these amazing creations!

fabulous tails on displayIf you don’t have a plethora of art supplies, don’t worry. The tail can be decorated with plain old crayons, markers, or even paint. Kids will have fun no matter what!